janitza UMG 806, Руководство пользователя и технические данные

Страница: 52 / 92

52
UMG 806 www.janitza.com
10.3 Parameter list
·Parameter addresses are not Modbus addresses!
·Modbus addresses can be found in the separate
Modbus address list in the download area at
www.janitza.com
Address Format Designation Setting range Unit Default
setting
000 uint32 Current transformer primary, I1..I3 1 .. 9999999 5
001 uint16 Current transformer secondary, I1..I3 1 .. 6 5
002 uint32 Voltage transformer primär, L1..L3 1 .. 9999999 380
003 uint16 Voltage transformer secondary, L1..
L3
1 .. 690 380
010 uint32 Current transformer primary, I4 1 .. 9999 5
011 uint16 Current transformer secondary, I4 1 .. 6 5
020 uint32 Current transformer primary, I5 1 .. 9999 5
021 uint16 Current transformer secondary, I5 1 .. 9999 5
110 uint16 Network system/wiring
0 : 3P4W
1 : 3P3W
2 : 1P2W
0, 1, 2 0
113 uint16 Deletes all energy data (1 : delete) 0.1
114 uint16 Resets all recordings (1 = reset) 0.1
115 uint16 Resets all min. and max. values
(1 = reset)
0.1
Address Format Designation Setting range Unit Default
setting
200 uint8 Device address 1 .. 247 1
201 uint8 Baud rate, RS-485
0 = 9,600 bit/s
1 = 19,200 bit/s
2 = 38,400 bit/s
3 = 57,600 bit/s
4 = 115,200 bit/s
0 .. 7 3
202 uint8 RS-485, parity
0 = N.8.1
1 = E.8.1
2 = O.8.1
3 = N.8.2
0 .. 3 0
203 uint8 RS-485, mode
0 = Modbus RTU/Slave
1 = Master
0.1 0