janitza UMG 509-PRO, Руководство пользователя и технические данные

Страница: 100 / 116

UMG 509-PRO
100
www.janitza.com
15. Technical data
General
Net weight (with attached plug-in con-
nectors)
approx. 1080 g
Device dimensions approx. l = 144 mm, w = 144 mm, h = 75 mm
Battery Type Li-Mn CR2450, 3 V (UL 1642 approval)
Clock (in the temperature range of -40°C
to 85°C)
+-5 ppm (equivalent to 3 minutes per year)
Transport and storage
The following information applies to devices that are transported or stored in their original packaging.
Free fall
1 m
Temperature -25 °C to +70 °C
Environmental conditions during operation
The device is intended for weather-protected, stationary use.
The device’s ground wire connection must be connected! Protection class I according to IEC 60536
(VDE 0106, part 1).
Working temperature range
-10 °C .. +55 °C
Relative humidity 5 to 95% (at 25 °C) without condensation
Operating elevation 0 .. 2000 m above sea level
Pollution degree 2
Mounting orientation vertical
Ventilation forced ventilation is not required
Protection against foreign matter and
water
·Front
·Rear
IP40 according to EN60529
IP20 according to EN60529
15.1 Supply voltage
Supply voltage
Installation overvoltage category 300 V CAT III
Fuse protection of the supply voltage
(fuse)
6 A, type B (approved according to UL/IEC)
Option 230 V:
- Nominal range
- Operating range
- Power consumption
95 V .. 240 V (50/60 Hz) / DC 80 V .. 300 V
+-10% of nominal range
max. 7 W / 14 VA
Option 24 V:
·Nominal range
·Operating range
·Power consumption 48 V .. 110 V (50/60 Hz) or DC 24 .. 150 V
+-10% of nominal range
max. 9 W / 13 VA
Connection capacity of the terminals (supply voltage)
Connectible conductors. Only one conductor may be connected per terminal point!
Single core, multi-core, fine-stranded
0.2 - 2.5 mm
2
, AWG 24 - 12
Terminal pins, wire end ferrules 0.25 - 2.5 mm
2
Tightening torque 0.5 - 0.6 Nm
Strip length 7 mm