janitza RD 96, Руководство пользователя и технические данные

Страница: 18 / 30

RD 96 www.janitza.de
18
5. Mounting
5.1 Installation location
DANGER
Danger of electric shock!
Electric shocks lead to serious injuries, including
death.
·Disconnect your system from the power supply
before mounting and connecting the device!
·Secure it against being switched on!
·Check to be sure it is de-energized!
·Ground and short circuit!
·Cover or block off adjacent live parts!
·The installation must only be carried out by
qualified personnel with electrical training!
Mount the device in stationary and weatherproof
front panels or switchboard panels of switchboard
cabinets or indoor small distribution boards.
Ground conductive front or switchboard panels!
ATTENTION
Material damage due to disregard of the instal-
lation instructions!
Disregard of the installation instructions can dam-
age or destroy your device.
· Provide adequate air circulation in your in-
stallation environment and cooling, as need-
ed, when the ambient temperatures are high!
5.2 Mounting orientation
The cut-out dimension in the front panel or switch-
board is 92
+0.8
mm x 92
+0.8
mm
(3.62
+0.03
in x 3.62
+0.03
in).
To ensure adequate ventilation of the device, take
into account the minimum distances to adjacent
components!
Fig.: Mounting orientation, rear view of RD 96 - minimum
distances and air flow.