11
www.janitza.de
Procont
®
-LMC-008-IO
3. Product description
3.1
Device description
Intelligent, network-capable expansion module for
Procont
®
-LMC, for an additional 4 digital inputs
and 8 relay outputs for consumer control.
Performance characteristics:
·Expansion for up to 12 load groups
·Integration of up to 4 pulse counters
·8 relay outputs for consumer control
·8 manual switches for relay outputs manual/au-
tomatic
·LCD display with backlight
·Operation via 2-axis joystick
·12 LEDs for status display
·DIN rail mounting 35 mm
3.2
Incoming goods inspection
Safe and trouble-free operation of this device and
its components presupposes proper transport,
proper storage, set-up and assembly as well as
operation and maintenance in addition to com-
pliance with the safety information and warning
notices.
Exercise due caution when unpacking and packing
the device, do not use force and only use suitable
tools.
Before installing the device, please check the
following:
·Its flawless mechanical condition by visual in-
spection.
·The scope of delivery for completeness.
If it can be assumed that safe operation of the
device is no longer possible:
·Disconnect the device from operation immediate-
ly!
·Secure the device against being switched on
again!
It can be assumed that safe operation is no longer
possible if the device, for example:
·Has visible damage.
·No longer functions despite an intact power
supply.
·Was subjected to extended periods of unfavor-
able conditions (e.g. storage outside of the per-
missible climate thresholds without adjustment to
the room climate, condensation, etc.) or transport
stress (e.g. falling from an elevated position, even
without visible external damage, etc.).
3.3
Intended use
The device is:
·Only for use in the industrial sector.
·Intended for installation in switchboard cabinets
and small distribution boards.
·Intended for mounting on a DIN rail.
·Not intended for installation in vehicles! Use of
the device in non-stationary equipment consti-
tutes an exceptional environmental condition and
is only permissible by special agreement.
·Not intended for installation in environments with
harmful oils, acids, gases, vapors, dusts, radia-
tion, etc.
·Designed as an indoor device.
Safe and trouble-free operation of the device
requires proper transport, storage, assembly,
installation, operation and maintenance.
3.4
EU conformity declaration
Please see the EU declaration of conformity post-
ed at www.janitza.de for the laws, standards and
directives applied by Janitza electronics GmbH for
the devices. The CE conformity marking require-
ments for the device arise from the EU conformity
declaration and the laws, standards and directives
mentioned therein.
·
3.5
Scope of delivery
Quantity Part. no.
Designation
1
60.00.303
Procont
®
-LMC-008-IO
1
33.03.843
Installation instructions
