janitza PA-MID+, Руководство пользователя и технические характеристики

Страница: 95 / 98

www.janitza.de
95
UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
Type Size Minimum Maximum
short 16 bit -2
15
2
15
-1
ushort 16 bit 0 2
16
-1
int 32 bit -2
31
2
31
-1
uint 32 bit 0 2 32 -1
float 32 bit IEEE 754 IEEE 754
20.2 Number formats
Address Format RD/WR Variable Unit Comment
19096 float RD _IQH[1] varh Reactive energy, inductive, L2
19098 float RD _IQH[2] varh Reactive energy, inductive, L3
19100 float RD _IQH_SUML13 varh Reactive energy L1..L3, ind.
19102 float RD _CQH[0] varh Reactive energy, capacitive, L1
19104 float RD _CQH[1] varh Reactive energy, capacitive, L2
19106 float RD _CQH[2] varh Reactive energy, capacitive, L3
19108 float RD _CQH_SUML13 varh Reactive energy L1..L3, cap.
19110 float RD _THD_ULN[0] % Harmonics, THD,U L1-N
19112 float RD _THD_ULN[1] % Harmonics, THD,U L2-N
19114 float RD _THD_ULN[2] % Harmonics, THD,U L3-N
19116 float RD _THD_ILN[0] % Harmonics, THD,I L1
19118 float RD _THD_ILN[1] % Harmonics, THD,I L2
19120 float RD _THD_ILN[2] % Harmonics, THD,I L3
20.3 Note on saving measured values and con-
figuration data
NOTE
Saving measured values and configuration data!
In the event of an
operating voltage failure
the
recording can be interrupted for a maximum of
5 minutes. The following
measured valuesare
saved by the device every 5 minutes
in a non-vol-
atile memory:
·
Comparator timer
·
S0 meter readings
·
Minimum, maximum and average values
(without date and time)
·
Energy values
The device saves configuration data immediate-
ly!