www.janitza.de
89
UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
19. Technical data
Transport and storage
The following information applies to devices that are transported or stored in their original packaging.
Free fall
1 m (39.37 in)
Temperature
-25 °C (-13 °F) to +70 °C (158 °F)
Relative air humidity (non-condensing)
0 to 90% RH
Environmental conditions during operation
Install the device in a weather-protected and stationary location.
Protection class II according to IEC 60536 (VDE 0106, Part 1).
Rated temperature range
-10 °C (14 °F) ... +55 °C (131 °F)
Relative air humidity (non-condensing)
0 to 75% RH
Operating elevation
0 .. 2000 m (6562 ft) above sea level
Pollution degree
2
Mounting orientation
As desired
Ventilation
No forced ventilation required.
Protection against foreign matter and water
- Front
- Rear
- Front with seal
IP40 according to EN60529
IP20 according to EN60529
IP54 according to EN60529 (mandatory for the MID device!)
Supply voltage
Option 230 V
Nominal range
AC 90 V - 277 V (50/60 Hz) or
DC 90 V - 250 V, 300 V CATIII
Power consumption
max. 4.5 VA / 2 W
Option 24 V *
Nominal range
AC 24 V - 90 V (50/60Hz) or
DC 24 V - 90 V, 150 V CATIII
Power consumption
max. 4.5 VA / 2 W
Operating range
+-10% of nominal range
Internal fuse, not replaceable
Type T1A / 250 V DC / 277 V AC according to IEC 60127
Recommended overcurrent protective device for the
line protection (UL approval)
Option 230 V: 6 - 16 A (Char. B)
Option 24 V *: 1 - 6 A (Char. B)
The 24 V option only applies to the UMG 96-PA!
Recommendation for the maximum number of devices on a line circuit breaker:
Option 230 V: Line circuit breaker B6A: max. 4 devices / line circuit breaker B16A: max. 11 devices
Option 24 V: Line circuit breaker B6A: max. 3 devices / line circuit breaker B16A: max. 9 devices
General
Net weight (with attached plug-in connectors)
approx. 250 g (0.55 lbs)
Package weight (incl. accessories)
approx. 500 g (1.1 lbs)
Battery
Type Lithium CR2032, 3 V, (UL 1642 approved)
Backlight service life
40000 h
(backlight reduces to approx. 50% over this period)
Impact resistance
IK07 according to IEC 62262
*
