JPC 100-WEB
www.janitza.de
8
4.
Mounting
4. 1
Installation location
The device is suitable for installation in
stationary and weatherproof switchboards
indoors.
4. 2
Mounting orientation
The break-out dimension in the switchboard
is 261 ± 1 mm x ±164 ± 1 mm (10.27 ± 0.04
in x 6.46 ± 0.04 in) with a wall thickness of
approximately 2 to 4 mm (0.08 bis 0.16 in).
Fig.1: Mounting orientation of the JPC 100-WEB
CAUTION
Material damage due to disregard of the
installation instructions!
Disregard of the installation instructions can
damage or destroy your device.
Observe the information on the mounting
orientation in the sections "Mounting"
and "Technical Data".
WARNING
Risk of injury due to electrical voltage!
Severe bodily injury or death can result
from:
• touching bare or stripped leads that are
energized.
• device inputs that pose a hazard when
touched.
Therefore please abide by the following:
•
Disconnect your system from the pow-
er supply before starting work!
R15
164
±
1
261 ± 1
