JPC 100-WEB
www.janitza.de
16
7. 1. 4 NTP / Clock
The time for the JPC 100-WEB is either set
manually or obtained from an NTP server.
NTP stands for
Network Time Protocol
which
is a protocol for time synchronization of de-
vices in a network.
7. 1. 5 Ping testing
Changing settings
Press the
Change
button in the
NTP
or
Clock
area to open the time settings (Fig. 19).
Here you can perform the following actions
by touching the corresponding entry:
• Select between automatic and manual
time and date setting.
• Select between automatic and manual
time zone.
• Change the NTP server.
• Change the time format (12h/24h)
Fig. 16: Change the NTP settings
Fig. 17: Time and date settings
Fig. 18: Ping testing
In the
Ping testing
area, you can ping an
IP address to test if the JPC 100-WEB has
access to it.
To do so, enter the IP address in the text fi eld
and then click the
Ping
button.
The test may take a few seconds.
Fig. 19: Change the time and date settings
