background image

8

www.janitza.de

800-CT8-LP module

1.  Information on the devices and the user manual

1.1  Disclaimer

Compliance with the usage information for the 
devices (modules/components) is a prerequisite for 
safe operation and attaining the stated performance 
characteristics and product features.

Janitza electronics GmbH assumes no liability for 
bodily injury, material damage or financial losses 
which result from disregard of the usage information.

Ensure that the usage information for the products is 
legible and accessible.

1.2  Copyright notice

© 2023 - Janitza electronics GmbH - Lahnau. All 
rights reserved.

Any reproduction, processing, distribution or other 
use of this usage information, in whole or in part, is 
prohibited.

All trademarks and the rights arising from them are 
the property of the respective owners of these rights.

1.3  Technical changes

 ·Make sure that your device (modules/components) 

matches the user manual. 

 ·This user manual applies to the 800-CT8-LP mod-

ule. Separate validities and distinctions are marked. 

 ·First make sure you have read and understood the 

usage information accompanying the product.

 ·Keep the usage information associated with the 

product available for the entire service life and pass 
it on to any possible subsequent users.

 ·Find out about device revisions and the associated 

modifications of the usage information associated 
with your product at www.janitza.de.

1.4  About this user manual

If you have questions, suggestions or ideas for im-
provement of the user manual, please let us know via 
email at: [email protected].

INFORMATION

This user manual describes the 800-CT8-LP module 

for the UMG 801 basic device and provides informa-

tion about the operation of the devices and modules.

Also consult the additional usage information relevant 

for this user manual, such as:

 ·the installation manual.

 ·the data sheet.

 ·the "Safety information" supplement.

 ·the supplement on mounting the modules.

 ·the usage information on the basic device and 

the integrated modules of your meter and module 

topology.

Moreover, the 

GridVis

®

 software has an “online 

help” feature.

INFORMATION

Our usage information uses the grammatical mascu-

line form in a gender-neutral sense! This form always 

refers equally to women, men and diverse. In order 

to make the texts more readable, distinctions are not 

made. We ask for your understanding for these simpli-

fications.

Содержание 800-CT8-LP























































Отзывы: