janitza 800-CT8-LP Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 54

janitza 800-CT8-LP Скачать руководство пользователя страница 17

17

www.janitza.de

800-CT8-LP module

3.10 Operating concept

Options to configure the basic device with current
measuring module or to read measured values:

·Display and buttons on the basic device (user

interface).

·GridVis

®

network analysis software.

·RS-485 or Ethernet interface.

The modules can be used to realize meter and mod-
ule topologies with a flexible arrangement of the DIN
rails. For the operation of the devices, components
and modules integrated in your meter and module
topology, please refer to the respective additional
usage information.

INFORMATION

Please refer to the user manual of the UMG 801

basic device for the operation, configuration and

readout of expansion modules.

This user manual describes the modules and pro-

vides information on the operation of the modules via

the basic device (UMG 801).

The GridVis

®

software has an online help with tutori-

als.

A list of parameters and Modbus addresses with

data on your basic device with module is available

for you as a download at www.janitza.de.

3.11 GridVis

®

network analysis software

With the GridVis

®

software, you have the perfect tool

for programming, reading out and visualizing mea-
surement data (download at www.janitza.de).

Performance characteristics of the GridVis

®

soft-

ware

·Configuration of the basic device and the modules

of your meter and module topology.

·Graphic display of measured values.
·Online help and tutorials.

Connections to the PC (GridVis

®

software)

Information on connections for communication
between the PC and the basic device (with modules)
can be found in the usage information of the basic
device.

«
...
15
16
17
18
19
...
»

Содержание 800-CT8-LP























































Отзывы:

Нет отзывов