janitza 800-CT8-LP, Руководство пользователя и технические данные

Страница: 10 / 54

10
www.janitza.de 800-CT8-LP module
2. Safety
The chapter on Safety contains information which
must be observed to ensure your personal safety
and avoid material damage.
2.1 Display of warning notices and safety infor-
mation
The warning notices shown below
·are found throughout the usage information.
·can be found on the devices themselves.
·indicate potential risks and hazards,
·underscore aspects of the information provided that
clarifies or simplifies procedures.
This additional symbol on the device (module/com-
ponent) itself indicates an electrical hazard that can
lead to severe injury or death.
This general warning symbol draws attention to a
possible risk of injury. Be certain to observe all of the
information listed under this symbol in order to avoid
possible injury or even death.
2.2 Hazard levels
Warning and safety information is marked by a
warning symbol, and the hazard levels are shown as
follows, depending on the degree of hazard:
DANGER
Warns of an imminent danger which, if not avoided,
results in serious or fatal injury.
WARNING
Warns of a potentially hazardous situation which, if
not avoided, could result in serious injury or death.
CAUTION
Warns of an immediately hazardous situation which,
if not avoided, can result in minor or moderate injury.
ATTENTION
Warns of an immediately hazardous situation which,
if not avoided, can result in material or environmental
damage.
INFORMATION
Indicates procedures in which there is no hazard of
personal injury or material damage.
2.3 Product safety
The devices, components and modules reflect
current engineering practice and accepted safety
standards, but hazards can arise nonetheless.
Observe the safety regulations and warning notices.
If notices are disregarded, this can lead to personal
injury and/or damage to the product.
Every type of tampering with or use of the devices
and the modules,
·which goes beyond the mechanical, electrical or
other operating limits can lead to personal injury
and/or damage to the product;
·constitutes “misuse” and/or “negligence” under the
product’s warranty and thus voids the warranty for
any possible resulting damage.
Read and understand the user manual and the usage
information on the basic device before installing, op-
erating, maintaining and using the devices, compo-
nents and modules.
Only operate the devices, components and modules
when they are in perfect condition and in compliance
with this user manual and the usage information that
is included. Send defective devices, components
or modules back to the manufacturer in compliance
with proper transport conditions.
Retain the user manual throughout the service life of
your product and keep it at hand for consultation.
When using the device, component or module, also
observe the legal and safety regulations for your sys-
tem that are applicable for the respective use case.