background image

AquaLink

® 

RS OneTouch™   |  Owner’s Manual

Page 33

ENGLISH

   

•  Access program or manual control 

via SPRINKLERS menu in the 

EQUIPMENT ON/OFF menu.

•  SPRINKLERS will not appear in 

the EQUIPMENT ON/OFF menu 

if no sprinkler program is ON. 

•  Cancel currently running program 

by selecting CANCEL TODAY, 

MANUAL START, or DISABLE 

PROGRAMS.

•  Selecting ENABLE PROGRAMS 

will not cancel currently running 

program prior to new program 

start.

•  There are three (3) Sprinkler 

system states:

• 

OFF: 

Sprinklers are disabled until 

it is re-enabled. No programs will run 

regardless of ON or OFF state.

• 

ENA: 

Sprinklers are enabled and 

any program set to ON with an active 

start time will initiate.

• 

DLY: 

Sprinklers are disabled 

for 24 hours from the time DLY was 

selected. After 24 hours, sprinklers 

will return to ENA state.

4.6.1  CANCEL TODAY

SPRINKLERS

EQUIPMENT ON/OFF 

Select to set a 24 hour delay of the 

sprinkler system. This feature may 

also be used to quickly turn off all 

sprinkler valves.

4.6.2  MANUAL START

SPRINKLERS

EQUIPMENT ON/OFF 

Select to manually start any 

sprinkler program or select ALL 

PROGRAMS to run each program 

in sequence.

•  Program must be set to ON to 

appear on MANUAL START list.

•  Selected program will start 

immediately and run to completion 

unless interrupted by user.

•  SPRINKLERS will display ENA 

once manually started programs 

are completed.

Sprinklers

Cancel Today

Manual Start

Enable Programs

Disable Programs

Highlight an item

and press SELECT

More

Aux5

Aux6

Aux7                 

Extra Aux       

Sprinklers

   

Spa Mode       

Pool Heat 

  

Off

Off

Off

Off

Dly

Off

Off

  

Sprinklers

Cancel Today

Manual Start

Enable Programs

Disable Programs

Highlight an item

and press SELECT

Sprinklers    ENA

Sprinklers

Manual Start

All Programs

Program 1

Program 2

Program 3

Highlight an item

and press SELECT

Содержание AquaLink RS OneTouch Control Systems





















































Отзывы: