Editing
and
Monitoring
Scenes
Scenes
2.
You can control the overall level of the scene by raising or lowering the
Scenes fader.
OR
1.
Press the ‘Fixtures / Scenes’
button above the Master fader to switch
the 12 fixture faders switch to Scene mode
2.
Push one of the twelve Scene faders up. The led in the scene flash button
flashs slowly to show that the scene is contributing to the console output –
the look you see on stage.
OR
1.
Press one of the 12 flash buttons. The scene or chase will play until the
button is released.
Stopping
(aka
releasing)
a
Scene
To stop playback of a scene you do this:
1.
Press the scene button you want to stop. The led in the scene button stops
flashing and stays lit.
Editing
and
Monitoring
Scenes
To edit a scene or view it’s settings you do this:
1.
If the touchscreen is not already on the Home page, press the Home button,
below the screen.
2.
Press the Scenes button on the touchscreen. Stage CL displays the Scenes
window with the ‘Control’ tab selected:
.
The Control tab of the Scene window shows you a list of the Scenes that are
playing.
You can touch on a Scene name to select it and then use the buttons at the bottom
of this window to Release (fade out) or Replay the scene.
7
‐
2
Stage
CL
User
Guide,
Version
0.4
