INSTALLATION GUIDE
®
Installation guide for James Wedge Series Speaker
Take the bracket off of the back of the speaker
by using your hand, and pulling one side of the
bracket out.
1
3
If the wires are in the wall, then run it through
the bottom slots on the bracket (top photo).
If the wire is in the ceiling, then run the wire
through the top slots of the bracket (bottom
photo).
Next, determine if your wires are located in the
ceiling or the wall.
2
If the speaker is being installed flush with the wall
and ceiling, then install all nine screws to secure
the bracket.
4
Now connect your wires to the speaker. (Red to
red, and black to black)
6
5
The bracket can also be secured to a wall
using just six wall screws.
WEDGE SERIES INSTALLATION GUIDE
