JAMAR Technologies Traffic Engineering II, Руководство пользователя

Страница: 13 / 40

2-3
Mounting the Traffic Engineering II Radar
Once a site has been selected, the Traffic Engineering II Radar can be
easily mounted using the installation kit.
Step #1
- Thread the SnapLock clamp bands
through the openings on the pole bracket.
Step #2
- For the most accurate results, the
bracket should be installed so the Traffic Engi-
neering II Radar is facing traffic on a 45 degree
angle.
IMPORTANT:
The area of the Traffic Engi-
neering II Radar that you are aiming toward the road on a 45 degree
angle is the crosshairs on the front of the Radar head, as shown in
the picture here.
Once you have determined the 45
degree angle for the bracket, wrap
the bands around the pole and
place the bracket.
Step #3
- Snap down the screws on the clamp bands and tighten the
clamp with a flat-head screwdriver or 5/16 inch nut driver.
Chapter 2 — Site Installation