USER GUIDE AND WARRANTY INFORMATION
www.jamaudio.com
HX-P710
Where There’s A Jam, There’s A Party!
™
READ UP.
PARTY DOWN.
HEY. HAVE WE SEEN YOU HERE BEFORE?
PACKAGE CONTENTS
Register your speaker at www.jamaudio.com.
Information
about where you bought them and how you’re using them is
like gold for the people who make these speakers. Do them
a solid, will ya?
Por manual de instrucciones e información de garantía
en español visítenos en www.jamaudio.com
There are lots of cool Jam speakers.
Check them all out at
www.jamaudio.com
User Manual
Charging Cord
Speaker
VO
LU
ME
+
VO
LUM
E -
Language
Selector Pin
LANGUAGE SELECTOR PIN
JUST CHARGE IT
CONTROL YOUR DESTINY...
OR AT LEAST YOUR SPEAKER
BLUETOOTH
®
CONNECTION: IT’S A SETUP
ALLOW US TO SHED SOME LIGHT
HOOKING UP OLD SCHOOL AUDIO, JACK
HELLO? SPEAKERPHONE? YES!
1. The cord that came with the
speaker—the one with the USB
on one end and the Micro USB
on the other—will work with
your computer.
2. If you want to use the wall outlet,
you’ll need to pick up a power
cord with a Micro USB the next
time you’re at the store, or use
any USB AC adapter, including
the one for your cell.
Now go get ready for an epic night while your speaker does
too. It needs about 3 hours of me time to be fully charged for
8 hours of party time.
Charging the speaker is so easy you’ve
probably figured it out by now, but just in
case, you’ve got two options: your computer
or a wall outlet.
V
OL
U
ME +
V
O
L
U
M
E
-
V
OL
UM
E +
V
O
L
U
M
E
-
1. That’s the power button, press and
hold for 5 seconds to power on
2. Push it to play, push it again to pause
3. That light lets you know when
Bluetooth has the hook-up
4. Skip back a track or jam on
to the next song
5. Turn the music up
6. Carabiner
CHARGE
AUX
9
10
11
VOL
UME +
VOL
UME -
2
7
8
4
4
5
6
1
3
12
7. Check out how much juice is in
the battery
8. Turn the music down (Wait, why
do you need to turn it down?)
9. It speaks too. Toggle between
languages here
10. The power cord goes here
11. Hook it up old-school
12. Language Selector Pin
Like any amazing couple, this one starts with a
connection—one between your device and the speaker’s
Bluetooth
.
Here’s how it works:
1. We know you’re probably going to think, “derp” with this
one, but we have to say it: Make sure the smartphone,
tablet or computer you want to hook up to the speaker
has
Bluetooth
. (There. We got that out of the way.)
2. Turn on the speaker and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
(We don’t know what you’re using. We’re not spies.)
4. Look for Jam Street in your device’s
Bluetooth
list or click
YES—whatever pops up on your device—and BAM!
you’re connected.
5. Now hit PLAY on your speaker and crank it up—or down
if you’re lame.
You’re probably only going to have to do this once, unless
your device goes through a major
I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth
will find each other every time just as long as the
speaker is set to
Bluetooth
and your device’s
Bluetooth
is,
you know—on.
If you’re connecting to a computer, you may have some
extra steps on that end. You’ll have to get that information
from the computer company.
Depending on your device you may be prompted to enter a
pairing code. If prompted enter “0000” as the code.
Press and hold PLAY/PAUSE for 5 seconds to activate
pairing mode.
Note: If you turn on your Jam Street but haven’t started the
party yet, it will automatically power off after 2 minutes of
unpaired inactivity.
Note: Once you've paired, if you pause the party for 15
minutes or more the Jam Street will automatically shut off to
preserve battery power.
Flashing Red
What It Looks Like
CHARGE
What It Means
Low Battery
RED (when plugged in)
Charging
LED OFF (fully charged) Ready to Party
Quick Flash BLUE
Pairing Mode
Slow Flash BLUE
Connected
RED
Line-in Mode
VOL
UME +
VOL
UME -
1. Plug one end of the cord into the speaker and the other
into the headphone jack on your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up—or down if
you’re lame.
You’ll have to play and pause the music from your device,
not your speaker. No problem. You’re there anyway, right?
3. If you’d rather not talk, hold down the PLAY/PAUSE
button on your Street for three seconds to ignore the call.
THE COOLEST PART: The Street knows when a call is
coming in and pauses the music before ringing. When you
hang up, the music starts where it left off—and so does the
party. If it’s you making the call, just start dialing from your
phone, and the Street automatically does its hands-free thing.
Isn’t it refreshing to know your speaker totally gets you?
When friends call asking to join the party—and you know
they will—answer the phone without disconnecting from
your JAM Street. Yes, that’s right. Your speaker is a
speakerphone too. How amazing is that?
Here’s how it works:
1. Make sure your phone and speaker are connected
through
Bluetooth
and not on a “break.”
2. Answering and ending a call works the same way: simply
click the PLAY/PAUSE button on your Street.
