65
R23
128
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P540
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P540)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Rewind needs about 2 hours for up to 8 hours of party time.
The LED lights on your speaker let
you know what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has
Bluetooth
.
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Rewind in your device’s
Bluetooth
list, or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
USA
[email protected]
1.888.802.0040
8:30am–7:00pm EST M–F
[email protected]
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
The device and
Bluetooth
will find each other every time, as long as
the speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you
know, on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press
and hold the - and + buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Rewind but haven’t started the party yet, it
will automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or
more, the Jam Rewind will automatically shut off to preserve battery
power.
Thank you for purchasing
the
JAM Rewind
. Check
out the sections below
for all the important
information about your
new speaker.
Pairing Mode
Bluetooth
Light
Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
AC adaptor not included.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
Bluetooth
®
Devices
JAM Rewind
on
>
3s
or
2h
3
5
2
6
1
7
8
4
9
10
1. Power button, press and hold for 3 seconds
to power on
2. Push it to play, push it again to pause
3. Turn the music up or down
4. Skip back a track or jam on to the next song
5. Lets you know when
Bluetooth
is paired
6. Check out how much juice is in the battery
7. The power cord goes here
8. Here’s where you hook it up old-school
9. Toggle between languages here
10. Language selector pin
