USER GUIDE AND WARRANTY INFORMATION
HX-P230
Where There’s A Jam,
There’s A Party!
™
READ UP.
PARTY DOWN.
HEY. HAVE WE SEEN YOU HERE BEFORE?
Register your speaker at www.jamaudio.com.
Information about where you bought it and how
you’re using it is like gold for the people who make these speakers. Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en
www.jamaudio.com
There are lots of cool Jam speakers.
Check them all out at www.jamaudio.com
BLUETOOTH
®
CONNECTION: IT’S A SETUP
Like any amazing couple, this one starts with a connection—one between your device and the
speaker’s Bluetooth.
Here’s how it works:
1. We know you’re probably going to think, “derp” with this one, but we have to say it: Make sure the
smartphone, tablet or computer you want to hook up to the speaker has Bluetooth. (There. We
got that out of the way.)
2. Turn on the speaker and look for the little blinking light.
3. Do whatever your device needs you to do on its end. (We don’t know what you’re using. We’re
not spies.)
4. Look for Jam Classic in your device’s Bluetooth list or click YES—whatever pops up on your
device—and BAM! you’re connected.
5. Now hit PLAY on your speaker and crank it up—or down if you’re lame.
You’re probably only going to have to do this once, unless your device goes through a major
I-just-dropped-it-in-the-pool kind of reboot. The device and Bluetooth will find each other every time
just as long as the speaker is set to Bluetooth and your device’s Bluetooth is, you know—on.
If you’re connecting to a computer, you may have some extra steps on that end. You’ll have to get
that information from the computer company.
Depending on your device you may be prompted to enter a pairing code. If prompted enter “0000” as
the code.
Press and hold the PLAY/PAUSE button for 5 seconds to activate pairing mode.
ALLOW US TO SHED SOME LIGHT
CHARGE
Flashing RED
Quick Flash BLUE
Slow Flash BLUE
RED
What It Looks Like
RED (while plugged in)
OFF (when plugged in)
Low Battery
Charging
Ready to Party
Pairing Mode
Connected
Line-in Mode
What it Means
PACKAGE CONTENTS
Charging Cord
User Manual
Speaker
JUST CHARGE IT
1. The cord that came with
the speaker—the one with
the USB on one end and
the Micro USB on the
other—is made to work
with your computer.
2. If you want to use the wall outlet, you’ll
need to pick up a power cord with a Micro
USB the next time you’re at the store, or
use any USB AC adapter, including the
one for your cell.
Now go get ready for an epic night while your speaker does too. It needs about 3 hours to be fully
charged for 4 hours of play.
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got
two options: you can charge it using your computer or a wall outlet.
CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER
1. This is the power switch.
2. Push it to play, push it again to pause.
3. Turn the music up or down. (Wait, why do you
need to turn it down?)
4. Lets you know when Bluetooth is paired.
5. Hook it up Old-School.
6. The power cord goes here.
7. Check out how much juice is in the battery.
2
3
4
1
5
6
7
