AUX
IN
CHAR
GE
Por manual de instrucciones e información de garantía en español visítenos en
www.jamaudio.com
Thanks for the invite. We’ve got some pretty cool friends too, you
know? Check them out at www.jamaudio.com
Charging the speaker is so easy you’ve
probably figured it out by now, but just in case,
you’ve got two options: your computer or a
wall outlet.
1. The cord that came with the speaker—the
one with the USB on one end and the
Micro USB on the other—will work
with your computer.
2.
If you want to use the wall outlet, you’ll
need to pick up a power cord with a
Micro USB the next time you’re at the
store, or use any USB AC adapter,
including the one for your cell.
Now go get ready for an epic night while your speaker does too. It needs about 3
hours of me time to be fully charged for 8 hours of play.
HX-P430B
Package Contents
Just Charge It
User Manual
Charging Cord
Speaker
Control Your Destiny…or at Least Your Speaker
1. Check out how much juice is in the battery.
2. That’s the Mic.
3. Turn the music up or down. (Wait, why
do you need to turn it down?)
4. Push it to play, push it again to pause.
5. That light lets you know when
Bluetooth
has the hook-up.
6. The power cord goes here.
7. That’s the power button, press and hold
for 5 seconds to power on.
8. Plug in when you don’t have
Bluetooth
.
9. It speaks too. Toggle between languages.
10. Language Selector Pin.
Like any amazing couple, this one starts with a connection—one between your
device and the speaker’s
Bluetooth
.
Here’s how it works:
1. We know you’re probably going to think, “derp” with this one, but we have to
say it: Make sure the smartphone, tablet or computer you want to hook up to
the speaker has
Bluetooth
. (There. We got that out of the way.)
2. Turn on the speaker (press and hold for 5 seconds) and look for the little
blinking light.
3. Do whatever your device needs you to do on its end. (We don’t know what
you’re using. We’re not spies.)
4. Look for JAM XT in your device’s
Bluetooth
list or click YES—whatever pops
up on your device—and BAM! you’re connected.
5. Now hit PLAY on your speaker and crank it up—or down if you’re lame.
You’re probably only going to have to do this once, unless your device goes
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth
will find each other every time just as long as the speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know—on.
If you’re connecting to a computer, you may have some extra steps on that end.
You’ll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code.
If prompted enter “0000” as the code. To clear the pairing history hold the
PLAY/PAUSE button for 5 seconds.
Note: If you turn on your XT but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
1. Plug one end of the cord into the speaker and the other into the headphone
jack on your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up—or down if you’re lame.
You’ll have to play and pause the music from your device, not your speaker.
No problem. You’re there anyway, right?
Bluetooth
®
Connection: It’s a Setup
Hooking Up Old School Audio, Jack
Hey. Have we seen you here before?
Register your speaker at www.jamaudio.com
Information like where you bought it and
how you’re using it is like gold for the
people who make these speakers.
Do them a solid, will ya?
3
3
5
1
10
2
USER GUIDE AND WARRANTY INFORMATION
Allow Us to Shed Some Light
CHARGE
Flashing RED
Quick Flash BLUE
Slow Flash BLUE
RED
What It Looks Like
RED (while charging)
Light turns off (while
charging)
Low Battery
Charging
Fully Charged
Pairing Mode
Connected
Line-in Mode
What it Means
4
6
7
8
9
Language
Selector Pin
LANGUAGE SELECTOR PIN
EXTREME WIRELESS SPEAKER
EXTREME WIRELESS SPEAKER
