1
MANUAL for JAKKA ADVANCED CONTROLLER
1. ON—OFF OPERATIONS
Use the
key to Opening/Closing operations.
When pressing the key once, the device will switch on
or off.
Off Position
On Position
2. OPERATION MODE SETTINGS
While the device is in the On Position, operation mo-
de can be changed with
key.
Note: The active mode icon flashes on the panel.
Ventilation Mode
Cooling Mode
3. SETPOINT SETTING
Use the
▲
and
▼
keys
to adjust the setpoint. If
the keys are pressed one
time, setpoint will be
changed 1 °C. Use the
▲
key to increase the set-
point, use the
▼
key to
decrease the setpoint.
Setting range: 5 °C—30
°C.
Setpoint Setting
Heating
Electrical Heater Stages
Room Tmp
Auto
Main Digits
Supply Air Fan Speed
Auto-5-4-3-2-1
Exhaust Air Fan Speed
1-2-3-4-5-Auto
Cooling
Ventilation
Alarm Notification
Auxiliary Digits
Heating Mode
ON/OFF — On/Off Key
MODE — Mode Key
FAN — Fan Key
▲
▼
SET — Increment/Decrement Key
WARNING !!
Parts that need to be considered in the screenshots
are marked with red circle. Please notice the scre-
enshots.
KEYPAD and PANEL DESCRIPTION
4. MONITORING DIFFERENT TEMPERATURES
The sensor values, which is measured by main control-
ler, are displayed alternately on the panel. In this app-
lication “Room Temperature, Supply Air Temperature,
Outdoor Air Temperature” sensors can be measured
by main controller.
Note 1: If Room Temperature Sensor is not connected to
main controller, Temperature Sensor value of the panel is
measured.
Out. Air Tmp
Sup. Air Tmp
Air Quality
Setpoint
