JAI SP-12000C-CXP4-XT страница 9 Скачать руководство пользователя

Страница: 9 / 63

— 9 —

SP-12000M-CXP4 / SP-12000C-CXP4

Lens mount (F-mount)

Mount an F-mount lens, microscope adapter, etc. here.

Ventilation holes (SP-12000-CXP4-XT (option) only)

CXP (CoaXPress) connectors 1 to 4 (DIN)

Connect the coaxial cables for digital video output here. (Equivalent to Amphenol Connex
ACX1785-ND. PoCXP is also supported.)

LINK LEDs 1 to 4

Indicates the CXP connection status.

LED status and camera status

LED

Light

Status

POWER/TRIG LED

Lit green

Power is on.

Off

Power is off.

LINK LEDs 1 to 4

Lit amber

System starting up.

Blinking amber (rapid)

Detecting link (when PoCXP not in use).

Blinks for 1 second even when detected

immediately.

Blinking amber (slow)

Waiting for connection between device and host to

be established or for event (trigger, exposure pulse,

etc.) to occur.

/ Alternating between

green and amber (rapid)

Detecting link (when using PoCXP).

Blinks for 1 s even when detected immediately.

/ Alternating between

green and amber (slow)

Sending connection test packet.

/ / Blinking red,

green, amber (slow)

Compliance test mode enabled (equipment only).

Lit green

Connection between device and host is established,

but there is no data being transmitted.
An error occurred during data transmission (CRC

error, single bit error, etc. detected).

Lights for at least 200 ms before errors are

displayed when multiple errors occur

simultaneously.

Blinking green

Connection between device and host is established,

and data is being transmitted.

Red pulse (slow)

No connection.

Does not apply to devices using PoCXP.

Lit red

PoCXP overcurrent (host side only).

/ Alternating between

red and green (slow)

PoCXP has been established, but a connection

error between the device and host has occurred.

/ Alternating between

red and amber (slow)

A connection error between the device and host has

occurred while PoCXP is not in use.

Off

Power is off.

Содержание SP-12000C-CXP4-XT
































































Результаты поиска

Содержание SP-12000C-CXP4-XT

Отзывы:

Похожие инструкции для SP-12000C-CXP4-XT

Бренды по названию

Популярные бренды

JAI SP-12000C-CXP4-XT, Руководство пользователя

Результаты поиска

Содержание SP-12000C-CXP4-XT

Отзывы:

Похожие инструкции для SP-12000C-CXP4-XT

Бренды по названию

Популярные бренды