User Manual (Ver.1.4) - Main Functions
GOX-5105MC-CXP | GOX-8105MC-CXP | GOX-12405MC-CXP | GOX-16205MC-CXP | GOX-20405MC-CXP | GOX-24505MC-CXP
- 113 -
Event Control Function
Related Setting Items:
The Event Control function is a function that outputs a signal change point inside the camera as
information indicative of an event occurrence (event message).
Flow from Detecting an Event to Sending an Event Message
Events That Can Use the Event Control Function
Events that can use the Event Control function are as follows. You can specify whether or not to send
an event message when an event occurs at each event.
l
AcquisitionStart
l
AcquisitionEnd
l
ExposureStart
l
ExposureEnd
Cautions
:
l
This function can only be used with CXP 2.0 or later. The CoaXPress frame grabber board
used must support CXP 2.0 and the Event Control function.
l
You can check the current CXP version in CxpVersionUsed of
. If
CxpVersionUsed is CXP1.1, you cannot use this function.