JAI GOX-12409C-PGE, Руководство пользователя

Страница: 61 / 79

Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
61
LUTControl
Configure LUT settings.
Item Setting range Default value Description
LUTSelector Red, Green, Blue Red Select the LUT channel to control. (color model only)
LUTIndex 0 ～ 256 0 Set the LUT index table number.
LUTValue 0 ～ 4095 Gamma=1.0 Set the LUT value.
TestControl
Item Setting range Default value Description
TestPendingAck (ms) 0 ～ 10000 0
PendingAck function test command.
The camera waits for TestPendingAck (ms) time and returns an Ack response.
TransportLayerControl
Display information on transport layer control.
Item Setting range Default value Description
PayloadSize
48 ～ 67109240 12288 Display the payload size. (Include ChunkData) (unit: bytes)
GevCurrentPhysicalLinkConfigration
SingleLink SingleLink Display the LinkConfiguration status.
(Fixed at [SingleLink] on this camera)
GevSupportedOptionSelector ー ー
Select the supported options for GigEVision.
[Setting range]
SingleLink, MultiLink, StaticLAG, DynamicLAG, PAUSEFrameReception, PAUSEFrameGeneration,
IPConfigurationLLA, IPConfigurationDHCP,
IPConfigurationPersistentIP, StreamChannelSourceSocket, StandardIDMode,
MessageChannelSourceSocket, CommandsConcatenation, WriteMem, PacketResend, Event,
EventData, PendingAck, IEEE1588, Action, UnconditionalAction, ScheduledAction,
PrimaryApplicationSwitchover, ExtendedStatusCodes, ExtendedStatusCodesVersion2_0,
DiscoveryAckDelay, DiscoveryAckDelayWritable, TestData, ManifestTable,
CCPApplicationSocket, LinkSpeed, HeartbeatDisable, SerialNumber, UserDefinedName,
StreamChannel0BigAndLittleEndian, StreamChannel0MultiZone,
StreamChannel0PacketResendDestination, StreamChannel0AllInTransmission,
StreamChannel0UnconditionalStreaming, StreamChannel0ExtendedChunkData,
pGevSupportedOptionSelectorValue
GevSupportedOption True, False ー
Display whether support for the function selected in
GevSupportedOptionSelector is enabled or disabled.
GevInterfaceSelector 0 0 The value for this item is fixed at 0.
GevMACAddress ー ー Display the MAC address.
GevPAUSEFrameReception False False Not supported on this camera (fixed at [False]).
GevPAUSEFrameTransmission False False Not supported on this camera (fixed at [False]).
GevCurrentIPConfigurationLLA True True
Display whether the current IP configuration is calibrated by LLA (link-local
address). (Fixed at [True])
GevCurrentIPConfigurationDHCP
True, False True Select whether to set the IP configuration to DHCP.
GevCurrentIPConfigurationPersi
stentIP
True, False False Select whether to set the IP configuration to Persistent IP.
GevCurrentIPAddress ー ー Display the IP address.
GevCurrentSubnetMask ー ー Display the subnet.
GevCurrentDefaultGateway ー ー Display the default gateway.
GevIPConfigurationStatus
0:None, 1:PersistentIP,
2:DHCP, 3:LLA, 4:ForceIP
ー Display the current IP configuration status.
GevPersistentIPAddress ー ー Set the persistent IP address.
GevPersistentSubnetMask ー ー Set the persistent subnet mask.
GevPersistentDefaultGateway ー ー Set the persistent default gateway.
GevIEEE1588
GevIEEE1588ClockAccuracy ー
19:Unknown
[Setting range]
0:Within25ns, 1:Within100ns, 2:Within250ns, 3:Within1us, 4:Within2p5u
5:Within10us, 6:Within25us, 7:Within100us, 8:Within250us, 9:Within1ms
10:Within2p5ms, 11:Within10ms, 12:Within25ms, 13:Within100ms, 14:Within250ms
15:Within1s, 16:Within10s,
17:GreaterThan10s, 18:AlternatePTPProfile, 19:Unknown, 20:Reserved
GevIEEE1588Status
[Status]
Initializing, Faulty, Disabled, Listening, PreMaster, Master,
Passive, Uncalibrated, Slave