GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0)
Main Functions
- 76 -
To Use the Counter Function
Configure the settings as follows. Three counters can be configured (Counter 0 to 2).
Item
Setting Value / Selectable
Range
Description
Counter 0 ~ 2
Counter 0 ~ 2
Select the counter.
Counter 0 ~ 2
Event Source
Off
Frame Trigger
Frame Start
Exposure Start
Frame Transfer End
Select the counter event signal for which to read the count
value.
Counter 0 ~ 2
Event
Activation
Rising Edge (Fixed) or
Falling Edge
Specify the timing at which to count.
Note:
The four counter event signals are always counted up internally on the camera.
Non-Volatile Flash Memory
Storing Data in On-Camera Flash Memory
The camera has non-volatile memory for users to store data. Refer to the technical note “Storing Data
in On-Camera Flash Memory” for more information.
Note:
JAI strongly recommends saving images to the PC or other storage location because the
non-volatile flash memory may not have enough memory size to store large data.
