JAI GO-5100M-PGE, Руководство пользователя

Страница: 42 / 108

GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0) Main Functions
- 42 -
GPIO (Digital Input/Output Settings)
Related Setting Items: Digital IO Control
The camera is equipped with GPIO (general-purpose input/output) functions for generating and using
combinations of triggers and other necessary signals within the camera and of signals output from the
camera to the system such as those used for lighting equipment control.
Valid Input/Output Combinations
The following signals can be used as sources for each output destination (Trigger Selector, Line
Selector, Pulse Generator Selector). You can also connect two different sources to NAND paths in the
GPIO and reuse the signal generated there as a source for a different selector.
Note: = Default setting
Source
Signal
Output destination
Trigger Selector Line Selector
Pulse Generator
Selector
Acquisition
Start
Acquisition
Stop
Frame
Start
Transfer
Start
Line
2
Line
3
Time
Stamp
Reset
NAND
1 In 1
NAND
1 In 2
NAND
2 In 1
NAND
2 In 2
Pulse Generator
0
Low ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
High ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Line 5 - OPT 1
In
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
NAND 1 Out 1 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
NAND 2 Out 1 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Pulse
Generator 0
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
User Output 0 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
User Output 1 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Software
Trigger
✓ ✓ ✓ ✓ ✓ ✓
Action 1 ✓ ✓ ✓ ✓ ✓
Action 2 ✓ ✓ ✓ ✓ ✓
FVAL ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
LVAL ✓ ✓
Exposure
Active
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Frame Trigger
Wait
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓