Declaration of Incorporation
Item no. 10300023, Revision 08
35 ( 36 )
15
Declaration of Incorporation
Under the EC Machinery Directive
The safety instructions of the
product documentation sup-
plied must be observed.
Nakanishi Jaeger GmbH
SF-Elektromaschinenbau
Siemensstr. 8
D-61239 Ober-Mörlen
Tel. +49 (0) 60029123 -0
hereby declare that the product,
Product
High Frequency Spindle
Type
Z33-D060.02 K0,9a
Serial no.
See last page of manual
as far as possible from the supplied, complies with the essential requirements
of the Machinery Directive 2006/42/EC.
Sections of the Machinery Directive have been applied: 1.1.1; 1.1.2; 1.1.5; 1.3.2;
1.3.4; 1.5.1; 1.5.2; 1.5.4; 1.5.5; 1.5.6; 1.5.8; 1.5.9; 1.6.4; 1.6.5; 1.7.1; 1.7.1.1; 1.7.2;
1.7.3; 1.7.4;
The incomplete machinery in its standard design complies furthermore with
the following applicable regulations:
Applicable harmonized standards
DIN EN ISO 12100
Safety of machines
The machinery is incomplete and must not be put into service until the ma-
chinery into which it is to be incorporated has been declared in conformity
with the provisions of the Machinery Directive 2006/42/EC and any other ap-
plicable regulations.
We at Nakanishi Jaeger GmbH agree to submit the special documents for in-
complete machines to national authorities upon request.
The special technical documentation referred to in Annex VII, Part B, belong-
ing to the machine has been created.
Person who is authorized to compile the documents listed in Annex VII, Part B:
Nakanishi Jaeger GmbH
Ober-Mörlen, 01.09.2023
