Jäger F140-H830.04 S11JRW3V, Руководство пользователя

Страница: 34 / 52

Installation
Item no. 10408114, Revision 02 34 ( 52 )
8.4.3 Setting values
For guidelines on air quality,
see "Air purity classes (ISO
8573-1)
[
}
33] " section.
Ü
Keep to the following values:
Taper cleaning 4,5 - 6 bar
Pneumatic system for tool change ≥ 6,0 bar
8.5 Setting the internal coolant supply
1 Compressed air
10 bar n = 0 rpm
5 bar n < 1000 rpm
2
Minimum quantity cooling lubrication max. 80 bar
3 Cooling lubricant max. 80 bar
4
Vent G 1/4“
5 Leakage G 1/8“
Ü Keep lines short.
Ü Do not exceed the upper pressures specified.
Ü
Avoid pressure pulsation.
Ä
Max. ±5 bar.
Ü Avoid pressure peaks.
Low-pulsation delivery(±2 bar) of media by the pump increases the service life
of the cooling lubricant system components and reduces the noise level.