Transport and packaging
Item no. 10408020-01, Revision 03
6 ( 44 )
2
Transport and packaging
Avoid strong vibrations or impacts during transportation, as these could dam-
age the ball bearings of the HF spindle.
Ü
Any damage reduces the accuracy of the HF spindle.
Ü
Any damage restricts the functionality of the HF spindle.
Ü
Any damage shortens the service life of the HF spindle.
2.1
Scope of supply of HF spindle
The following parts are supplied with the HF spindle:
q
High Frequency Spindle
q
Felt cleaning taper
q
Transport packaging
Ü
Check the high frequency spindle for completeness upon delivery.
2.1.1
Optional accessories
Available on request:
q
Spindle holder
q
Frequency converter
q
Chiller
q
Collet grease
q
Further accessories on request.
Only approved accessories have been tested for operational safety and func-
tionality.
Ü
Do not use any other accessories – this may invalidate any warranty claims
and compensation claims for damages.
Ü
If the spindle holder is to be produced in-house, it is essential to contact
Nakanishi Jaeger GmbH
before starting production to request the toler-
ances and production plan for the spindle holder.
2.1.2
Documentation supplied
The documents listed below are supplied with the HF spindle:
q
Manual
q
The declaration of incorporation is part of the manual.
q
Inspection protocol
Ü
Check that the documentation supplied is complete when the spindle is
delivered. If necessary, request a new copy.
