Operating location
Item no. 10408021, Revision 02
25 ( 44 )
6.8
Air-borne noise emissions
CAUTION: Noise has an impact on health.
u
Only operate the HF spindle if you are wearing hearing protection.
7
Operating location
Example of design: Mounting
surface
Note the following points before installing the HF spindle:
Clamping range of spindle holder
Ü
Make sure that the correct spindle holder for the HF spindle is fitted in the
machine.
Clamping range of flange:
Ü
Make sure that the hole pattern of the HF spindle and hole pattern of the
mounting surface in the machine match.
Ä
Check the number and sizes of the mounting screws (optional acces-
sories).
Ü
Check the connecting hoses for damage.
Ü
Check the connecting cables for damage.
Ü
Only use undamaged hoses and cables.
Ü
Do not allow the HF spindle to run in the vicinity of a heat source.
