Jäger ADwin-Gold II Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 224

Jäger ADwin-Gold II Скачать руководство пользователя страница 12

The ADwin-Gold II System

ADwin

6

ADwin-Gold II

, Manual February 2013

Connection to the PC

The connection between

ADwin-Gold II

system and PC is made via Ethernet interface.

This way, there is direct access to processes and global variables of the T11 processor.
Please note, that only the T11 processor has direct access to the

TiCo

processor; a

direct access from the PC is not available.

Standard delivery

The standard delivery items for the

ADwin-Gold II

system:

–

the

ADwin-Gold II

system with Ethernet interface,

–

a cross-over Ethernet cable from the PC to the Gold device (length about 1.8m).

–

the power adapter: a three-pin power supply cable, which prevents the possibil-
ity of mismatch, at a slot metal sheet with socket connector,

–

the power supply cable from the power adapter to the system,

–

the

ADwin

CDROM,

–

the manual "Driver Installation",

–

this manual.

2.2.1

Options (no upgrades possible)

The following options are available:

–

Gold II-DA4 / -DA8

): Add-on to 4 or 8 analog outputs (differential). Each

output is equipped with a 16-bit DAC.

–

Gold II-CNT

): Four 32 bit counters, which can optionally be used for

period width measurement, as impulse counters or as up/down counters with
clock/direction or four edge evaluation for quadrature encoders. 4 decoders for
use with incremental encoders with SSI interface. 6 PWM outputs.

–

Gold II-CAN

(

): 2 CAN interfaces (both either high speed

or

low speed)

and 2 RSxxx interfaces (RS232, RS485).

–

Gold II-Profibus

(

): Profibus interface. Excludes options DeviceNet and

EtherCAT.

–

Gold II-DeviceNet

): DeviceNet interface. Excludes options Profibus

and EtherCAT.

–

Gold II-EtherCAT

(

): EtherCAT interface. Excludes options Profibus and

DeviceNet.

–

Gold II-Storage-16

): Memory card with 16GiB memory as well as a bat-

tery buffered real-time clock.

–

Gold II-Boot

(

): Flash-EPROM boot loader for stand-alone operation

without PC.

All additional options can be combined with each other. As an exception, the options
Profibus, DeviceNet and EtherCAT cannot be combined.

2.2.2

Accessories

–

ADbasic

, real-time development tool for all

ADwin

systems.

–

TiCoBasic

, real-time development tool for

TiCo

processors.

–

Gold II

-Pow: external power supply (necessary for notebook operation).

–

Gold II

-Pow-DIN: external power supply for on a DIN rail.

–

Gold II-Mount: kit for installation of

ADwin-Gold II

on a DIN rail.

–

Single cable-connector for a self-made external power supply cable.

«
...
10
11
12
13
14
...
»

Содержание ADwin-Gold II

































































































































































































































Отзывы:

Нет отзывов