Installation Instructions
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
© J A D O U S A 2 0 0 5
P r o d u c t s
L u x u r y F a u c e t s a n d A c c e s s o r i e s
Personal Hand Shower with
Adjustable Wall Mounted Bar
1
5
Turn off hot and cold water
supplies before beginning.
CAUTION
ROUGHING-IN
DIMENSIONS
6
HELPFUL HINTS FOR CLEANING AND MAINTENANCE
The solid brass product you have just purchased has been designed to give you years of beauty and service. It is
important to bring to your attention proper care and maintenance procedures, which will ensure its lasting beauty.
First and foremost, it is important (as it is with any fine piece of jewelry or furniture) that the product be wiped clean and
dry with a soft damp cloth after every use.
Second, under no circumstances should an abrasive cleaner or combination cleaner/polish be used on JADO products.
The abrasive nature of such products will eventually destroy the finish and void the warranty.
In the event of stubborn blemishes shown on the finish, we recommend use of Windex window cleaner with a soft cloth,
but we do not recommend it be used on an everyday basis.
It is important to note that it is normal to expect signs of usage over time.
Thank you for selecting JADO for your home.
H9 6 5 5 8 8
H 9 6 5 5 8 8
H 9 6 5 5 8 8
H 965588
INSTALL WALL SUPPLY
35-1/2"
(900mm)
5/8" D.
(16mm)
39-5/8"
(1008mm)
3-1/8"
(78mm)
5-3/4"
(146mm)
1"
(25mm)
2"
(51mm)
7-3/4"
(197mm)
Plumbers' Putty or Caulking
Adjustable Wrench
level
Drill
TOOLS REQUIRED
Regular Screwdriver
JADO USA
6615 West Boston
Chandler, AZ 85226
Phone:(8OO) 227-2734
Fax: (8OO) 552-JADO(5236)
www.jadousa.com
TO THE PURCHASER OF JADO BRASS PRODUCTS
Attention installer:
Please leave This Pamphlet for The Owner
POLISHED BRASS AND CUSTOM FINISH WARRANTY
: A 1 YEAR LIMITED FINISH WARRANTY from date of purchase is provided to the
first residential owner against defects in materials and workmanship. Due to the ever-changing finish of Patina products, the finish warranty
is excluded. Warranty shall not include problems related to the installation of the product.
MECHANICS
MECHANICAL WARRANTY:
A LIFETIME LIMITED WARRANTY is provided to the first residential owner on parts to be free from failure
related to defects in materials and workmanship but not installation.
CONDITIONS TO WARRANTIES
JADO Bathroom & Hardware Manufacturing Corp. places the following conditions on its finish and mechanical warranties to the first residential owner only.
JADO finish and mechanical warranties are limited to products correctly installed and used in a residential environment.
JADO warranties will not assume liability for damage due to abuse, mishandling, incorrect installation, improper maintenance, or deterioration
due to normal use.
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products.
In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased
along with proof of purchase.
JADO's obligation under the warranty shall be limited to the repair or exchange of any product which has been determined by JADO to be
defective after appropriate examination.
The state of California has mandated under Proposition #65 that
manufactures of products, including faucets which come into
contact with potable water, must warn the consumer if the product
contains materials listed by the state as a carcinogen or
reproductive toxin. Lead, which is contained in all brass faucets in
limited amounts appears on the State's list.
Preliminary industry tests have indicated that users of faucets
made from brass face no significant danger, however,
California Proposition #65 requires that we provide you with the
following notice:
NOTICE: JADO products conform to industry
requirements of water conservation under the
ASTM / ANSI A112.18.1M-1994 plumbing code.
Lavatory, bidet, wet bar and kitchen faucet sets
have a maximum flow rate of 2.2GPM. Shower
heads, hand showers and body sprays have a
maximum flow rate of 2.5GPM.
Warning: This product contains an element
known to the State of California to cause cancer
of reproductive harm.
JADO BATHROOM AND HARDWARE MFG. CORP.
6615 West Boston
Chandler, AZ 85226
JADO warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser
owns their home.
JADO will provide, free of charge, at it’s sole option, replacement part(s) or product (or if no longer available, a comparable
product) to replace those which have proven defective in materials or workmanship.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to JADO for all limited
warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than
genuine JADO replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by
a plumber, contractor, service provider or member of the purchaser’s household). The limited warranty excludes damage due to aggressive
air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business
usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic
components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty
does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential
damages, all of which are expressly disclaimed. This limited warranty is applicable only to JADO faucets manufactured after June 1, 1996
and installed in the United States and/or Canada.
This limited warranty gives the original consumer purchaser of an JADO faucet specific legal rights which may vary from state to
state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which
are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential
damages is not allowed, so those exclusions may not apply to you.
JADO Bathroom & Hardware Manufacturing Corp. provides the following warranties only to the first residential owner of our products.
FINISHES
FAUCET LIFETIME FUNCTION AND FINISH LIMITED WARRANTY
WALL SUPPLY
WITH BUILT IN
BACK FLOW
PREVENTER
1/2”
(13mm)
1-7/8"
1-1/16"
(27mm)
1/2
N.P.T.
(48" - 60") (OPTIONAL)
TO FINISHED FLOOR
RUBBER GASKET
FINISHED
WALL
FINISHED
WALL
1/2 NPSM HOSE
CONNECTION
35-1/2"
(900mm)
35-1/2"
(900mm)
1/2" NPT
APPLY SEALANT
1
2
5
1
C/L
C/L
Supply to WALL SUPPLY (1) is 1/2" NPT. See rough-in above for detailed information.
Install RUBBER SEAL (2) onto WALL SUPPLY (1).
Apply sealant or teflon tape to threads of 1/2" NPT supply nipple. Thread WALL SUPPLY (1)
onto supply nipple making a water tight seal. WALL SUPPLY (1) with RUBBER SEAL (2)
should be tight against finished wall.
2
3
4
INSTALL WALL BRACKETS
INSTALL ADJUSTABLE SHOWER BAR
INSTALL HOSE AND HAND SHOWER
12
9
11
1
10
6
8
7
2
Install SEAL (6) into COUPLING NUT (7). Connect COUPLING NUT (7) to WALL SUPPLY NIPPLE (8) and tighten.
INSTALL second SEAL (9) into SPRAY HOSE END (10 ) and connect HAND SHOWER (11) to SPRAY HOSE END (10).
Hand tighten.
TEST INSTALLED HAND SHOWER
Lift HAND SHOWER (1) from HOLDER (2) and direct spray into tub.
Turn hand shower valve on to check HAND SHOWER (1) for proper
operation and hose connections for leaks.
Use KNOB (3) on HOLDER (2) to adjust HAND SHOWER (1) height
on slide bar.
3
2
59"
(1499mm)
Teflon Tape
The ADJUSTABLE SHOWER BAR (1) works best if secured to a wall stud or cross brace within the wall, using the MOUNTING POST SCREW (2).
If the ADJUSTABLE SHOWER BAR (1) is to be installed on a tile or plaster wall the ANCHORS (3) and should be used.
With a flat blade screw driver secure the MOUNTING POSTS (4) to wall with MOUNTING POST SCREW (2).
For installations on drywall or tiled walls:
Use ANCHORS (3) for securing MOUNTING POSTS (4) to finished wall.
Drill two 1/4" dia. holes a minimum of 1-3/4" deep. Insert the two ANCHORS (3) flush with face of the finished wall.
Determine desired height and location (optional) of the upper mounting hole. Using the ADJUSTABLE SHOWER BAR (1) or a tape measure
mark the two spots for the ANCHORS (3). The distance between the two mounting holes is 35-1/2” (900mm). Use a level to make the
center line between the two mounting holes vertical. If the MOUNTING POSTS (4) are secured to a stud or cross brace drill small pilot
holes for MOUNTING POST SCREW (2).
Align the holes in the MOUNTING INSERT (5) with the holes in the ADJUSTABLE SHOWER BAR (1). Install the MOUNTING INSERT (5) into
the ends of the ADJUSTABLE SHOWER BAR (1).
2
3
4
LEVEL
Product Numbers
Hand Shower Set
832/9OO/...
Adjustable hand
Shower Bar 35-1/2”
832/O35/...
IQ
™
C/L
3
4
FINISHED
WALL
Install ADJUSTABLE SHOWER BAR (1) onto the two MOUNTING POST SCREW (2). With a flat blade screw driver tighten the two
set screws at both ends of the ADJUSTABLE SHOWER BAR (1). Thread the END CAPS (12) onto the set screws.
