Installation Instructions
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
© J A D O U S A 2 0 0 5
P r o d u c t s
L u x u r y F a u c e t s a n d A c c e s s o r i e s
H 9 6 5 5 5 1 R e v . 1 . 1
H 9 6 5 5 5 1 R e v . 1 . 1
H 9 6 5 5 5 1 R e v . 1 . 1
H 9 6 5 5 5 1 R e v . 1 . 1
4
Rough Valve for 3/4" Thermostatic
Mixing Valve with Integral Stops
Product Number
875/614/191
Thermostatic
Mixing Valve
with Stops
TO THE PURCHASER OF JADO BRASS PRODUCTS
Attention installer:
Please leave This Pamphlet for The Owner
POLISHED BRASS AND CUSTOM FINISH WARRANTY
: A 1 YEAR LIMITED FINISH WARRANTY from date of purchase is provided to the
first residential owner against defects in materials and workmanship. Due to the ever-changing finish of Patina products, the finish warranty
is excluded. Warranty shall not include problems related to the installation of the product.
MECHANICS
MECHANICAL WARRANTY:
A LIFETIME LIMITED WARRANTY is provided to the first residential owner on parts to be free from failure
related to defects in materials and workmanship but not installation.
CONDITIONS TO WARRANTIES
JADO Bathroom & Hardware Manufacturing Corp. places the following conditions on its finish and mechanical warranties to the first residential owner only.
JADO finish and mechanical warranties are limited to products correctly installed and used in a residential environment.
JADO warranties will not assume liability for damage due to abuse, mishandling, incorrect installation, improper maintenance, or deterioration
due to normal use.
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products.
In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased
along with proof of purchase.
JADO's obligation under the warranty shall be limited to the repair or exchange of any product which has been determined by JADO to be
defective after appropriate examination.
The state of California has mandated under Proposition #65 that
manufactures of products, including faucets which come into
contact with potable water, must warn the consumer if the product
contains materials listed by the state as a carcinogen or
reproductive toxin. Lead, which is contained in all brass faucets in
limited amounts appears on the State's list.
Preliminary industry tests have indicated that users of faucets
made from brass face no significant danger, however,
California Proposition #65 requires that we provide you with the
following notice:
NOTICE: JADO products conform to industry
requirements of water conservation under the
ASTM / ANSI A112.18.1M-1994 plumbing code.
Lavatory, bidet, wet bar and kitchen faucet sets
have a maximum flow rate of 2.2GPM. Shower
heads, hand showers and body sprays have a
maximum flow rate of 2.5GPM.
Warning: This product contains an element
known to the State of California to cause cancer
of reproductive harm.
JADO warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser
owns their home.
JADO will provide, free of charge, at it’s sole option, replacement part(s) or product (or if no longer available, a comparable
product) to replace those which have proven defective in materials or workmanship.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to JADO for all limited
warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than
genuine JADO replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by
a plumber, contractor, service provider or member of the purchaser’s household). The limited warranty excludes damage due to aggressive
air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business
usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic
components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty
does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential
damages, all of which are expressly disclaimed. This limited warranty is applicable only to JADO faucets manufactured after June 1, 1996
and installed in the United States and/or Canada.
This limited warranty gives the original consumer purchaser of an JADO faucet specific legal rights which may vary from state to
state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which
are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential
damages is not allowed, so those exclusions may not apply to you.
JADO Bathroom & Hardware Manufacturing Corp. provides the following warranties only to the first residential owner of our products.
FINISHES
JADO FAUCET LIFETIME FUNCTION AND FINISH LIMITED WARRANTY
Plumbers' Putty or Caulking
Adjustable Wrench
Teflon Tape
Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
Tubing Cutter
Regular Screwdriver
PARTS DESCRIPTION
MODEL NUMBER
875/614/191
HANDLE
EXTENSION
TEMPERATURE
CALIBRATION
UNIT
CHECK STOP
(COLD BLUE)
CHECK STOP
(HOT RED)
3/4" THERMOSTAT
CARTRIDGE
TOP
TOP
INSTALLATION OF SEAL SET
Important! Inform the tiler - see Figures 1 & 2
3
Ready plastered and pretreated wall. Fig. 1.
Use the PLASTER GUARD (1) for fixing the
SEALING FRAME (2). Fig. 1.
Glue on the SEALING FRAME (2). Fig. 1.
Finish tiling the wall. Fig. 2.
Turn off hot and cold water
supplies before beginning.
CAUTION
WARNING
1
Prepare water supplies per ROUGHING-IN DIMENSIONS. Make sure
the finished wall is between the minimum 1-11/16" and maximum 2-1/2" rough dimension.
ROUGHING-IN THE VALVE
Install VALVE (1) at indicated height and depth. Make sure the "TOP" marking on the PLASTER
GUARD (2) is up.
For support, use pipe BRACES (3) secured to wooden braces.
Connect the hot and cold water supplies. Assemble all connecting pipes. Close off the tub
port if it is not needed using a commercially available pipe plug. Connections are 3/4" NPT.
IMPORTANT! INSTALL ANY REQUIRED SHUT OFF OR DIVERTER VALVE INTO THE PIPING SYSTEM.
DO NOT SOLDER DIRECTLY TO THE VALVE BODY (1); THIS WILL DAMAGE
THE TEMPERATURE CONTROL ELEMENT AND CHECK STOP VALVES.
Remove PLASTER GUARD (2) if still installed.
CHECK STOPS (4,5) are supplied in the open position. Close using 5/32" (4 mm) hex
wrench to pressure test and to check for leaks.
Reassemble PLASTER GUARD (2) and FINISH WALL.
Beware of Freezing
. No water should remain in the MIXING VALVE if freezing is a possibility.
Remove the CHECK STOPS (4,5) to completely drain the MIXER UNIT (1).
To flush lines, remove the CHECK STOPS (4,5) and run water. If desired, the TEMPERATURE CONTROL UNIT
can be removed. Reinstall CHECK STOPS (4,5) and CONTROL UNIT (6), if it was removed.
COLD
HOT
Should the hot and cold water supply pipes
have been transposed making adjustment
impossible, proceed as follows:
If the system is delivering All Hot or All Cold and
no mixed water, the pipes are probably transposed.
Important note: RED CHECK STOP (4) is now
on the right of the mixer body and the BLUE
CHECK STOP (5) is now on the left.
BACK TO BACK INSTALLATION OR
TRANSPOSED SUPPLY PIPING
2
Remove check stops and reinstall them
transposed.
Shut off water at main supply.
Turn the water supply back on and perform
the temperature calibration in step 3.
D E E P R O U G H K I T
ROUGHING-IN DIMENSIONS
INSTALLATION OPTIONS
BATH/SHOWER
INSTALLATION
BATH FILLER
INSTALLATION
SHOWER
INSTALLATION
FINISHED FLOOR
FINISHED
WALL
1-13/16"
to
2-11/16"
3/4" NPT OUTLETS
3/4" NPT INLETS
5-7/8"
CL
DIVERTER
SHOWER HEAD
THERMOSTATIC
VALVE
BATH SPOUT
TUB PORT MUST
BE PLUGGED
IMPORTANT:
WHEN USING THIS VALVE AS A
BATH/SHOWER, A SEPARATE DIVERTER AND
ON-OFF VOLUME CONTROL VALVE IS REQUIRED
FOR PROPER OPERATION.
IMPORTANT:
WHEN USING THIS VALVE AS A
SHOWER, AN ON-OFF VOLUME CONTROL VALVE
IS REQUIRED FOR PROPER OPERATION.
IMPORTANT:
WHEN USING THIS VALVE AS
A BATH FILLER, AN ON-OFF VOLUME CONTROL
VALVE IS REQUIRED FOR PROPER OPERATION.
HOT
COLD
MIXED
HOT
COLD
HOT
COLD
ON-OFF VOLUME
CONTROL VALVE
BATH SPOUT
TUB PORT MUST
BE PLUGGED
SHOWER PORT MUST
BE PLUGGED
THERMOSTATIC
VALVE
THERMOSTATIC
VALVE
MIXED
MIXED
48" TO 54"
FOR SHOWER ONLY
(OPTIONAL)
32" TO 42"
FOR BATH/SHOWER
AND BATH FILLER
(OPTIONAL)
SHOWER HEAD
ON-OFF VOLUME
CONTROL VALVE
ON-OFF VOLUME
CONTROL VALVE
TOP
CHECK STOP
(HOT RED)
ROUGH WALL
FINISHED WALL
PLUG TUB
PORT
CHECK STOP
(COLD BLUE)
COLD
HOT
1
3
1
2
2
2
4
WOOD BRACE
5
6
If the CHECK STOPS (4, 5) were removed during installation, ensure the hot and cold
CHECK STOPS (4, 5) are not reversed. The hot CHECK STOP (4) has a red top and the cold
CHECK STOP (5) has a blue top.
5/32" Hex Wrench
JADO USA
6615 West Boston
Chandler, AZ 85226
Phone: (8OO) 227-2734
Fax: (8OO) 552-JADO(5236)
www.jadousa.com
JADO BATHROOM AND HARDWARE MFG. CORP.
6615 West Boston
Chandler, AZ 85226
TOP
TEMPERATURE CALIBRATION
Unscrew PLASTER GUARD SCREWS and remove PLASTER GUARD.
Check that arrow marking B points vertically upwards. If not, push the BLACK
CLAMP on the SECURING RING to the right, pull off KNOB MOUNT and reinstall
KNOB MOUNT with arrow "B" pointing upwards.
For 100° F adjustment, turn the water supply on. Turn KNOB MOUNT until the spout
temperature is 100° F. Check that arrow marking A on the KNOB MOUNT still points
upward after adjusting the thermostat to 100° F. If not, pull out the RED LOCKING DEVICE.
Remove KNOB MOUNT by pulling it towards you while standing directly in front of the valve.
Reinstall the KNOB MOUNT so that the arrow marking A points upwards.
The maximum mixed water temperature is set at 109° F at the factory.
This setting can be changed if desired.
Remove the TEMPERATURE LIMIT STOP (H shaped Black Plastic part). Reinstall it
at the desired notch as indicated in the diagram to limit the maximum mixed water
temperature to 104°F or 112°F.
Reinstall RED LOCKING DEVICE.
KNOB
MOUNT
ARROW
"A"
BLACK
CLAMP
ARROW
"B"
RED LOCKING
DEVICE
SECURING
RING
104
°
109
°
112
°
TEMPERATURE
LIMIT STOP
Fig. 1
Fig. 2
