cleaning
Cleaning The Convection Oven
RJGR Series
1. Remove oven racks and wash with a mild
cleaner/degreaser.
2. Soak the broiler pan in a mild cleaner/degreaser to
loosen dirt and facilitate cleaning.
3. Scrape off any food spills from the interior oven
walls and bottom pan. Use a soft spatula or a rough
cloth to remove encrusted material.
4. The tank of the convection oven is a one-piece
welded construction, therefore it cannot be
removed. Oven racks and rack guides can be
removed to facilitate cleaning.
5. The blower cover can be easily removed by
removing four wing nuts. Tools are not needed. Use
a mild cleaner/degreaser to clean the outside of the
blower cover.
6. With use, a limited amount of debris may
accumulate on the fins of the blower. Use a brass
bristle brush to remove any debris. Use extreme
caution to avoid bending or otherwise damaging the
blower fins.
7. The holes on the blower cover are not symmetrical.
When replacing the blower cover, make sure the
pattern of the holes is located at the lowest position.
This assures proper alignment with the blower axis.
Carefully tighten the four wings nuts to secure the
blower cover.
IMPORTANT: TURN OFF ELECTRICAL
POWER BEFORE CLEANING ANY PART
OF THE RANGE
37
BLOWER
COVER
WINGNUTS
Содержание RJGR
Страница 1: ...Residential Jade User Manual...
Страница 10: ...FEATURES OF YOUR RANGE operation 9 THIS PAGE LEFT INTENTIONALLY BLANK...
Страница 11: ...FEATURES OF YOUR RANGE operation 10 THIS PAGE LEFT INTENTIONALLY BLANK...
Страница 51: ...NOTES 50...