JBE-P2L1 Panel Manual V1.2 EN
Page 24
Release Date: January 5, 2021
Rev 01
5.4.2.3 View disablements
Use this menu to obtain a description of the active disablements.
Press F1 to return to the first page, press F2 to view previous page, press F3 to view next page, press F4 to
page up, press F5 to page down, press F6 to exit.
5.4.2.4 View zones under test
This menu will show the list of zones which are under test mode. Note that a zone under test is not in service
for fire detection.
Press F1 to return to the first page, press F4 to page up, press F5 to page down.
5.4.2.5 View zone status
Press 5 to access the submenu to view the status of zones from zone 001 along with their status (Normal /
Fault / Alarm). Users can access the zone number by pressing the numeric keypad or pressing F2 or F3 to
change the zone. To exit the current window, press F6.
5.4.2.6 View device status
Press 6 to access the submenu to view the status of the devices. In this submenu, all the devices that are
registered in the panel.
Press F1 to review the first page, press F4 or F5 to go back or forth in the zone list, press F3 and enter the
zone number from the numeric keypad to access detailed information / data in a specific zone, and press F6
to get out.
In single zone mode, F1 will delete the selected zone, F2 or F3 will change the zone number, F5 confirms
the numeric entry, F6 exits the submenu, and F4 allows selection of a batch.
In batch mode, press F1 to jump to the first page, press F4 to go up the page in the list, and to go down to
the next page, press F5. To exit the current interface, press F6. To return to single mode, press F3.
5.4.2.7 View address descriptions
Press 7 to access the submenu to view device descriptions. Device information is displayed as loop number
- device number, zone number, and device description.
Press F1 to go back / return to the first page, press F2 to review the maintenance details of the company
doing the maintenance work. Press F3 to access the Single View Mode submenu, users can access the loop
and address of interest manually from the numeric keypad. Under this submenu, by pressing F2 or F3, the
user can change the address of the device. By pressing F4 Batch, users can view the status of the devices
listed as batch / group, to scroll to the previous page, press F4, to scroll down to the next page, press F5.
To exit the current interface, press F6.
5.4.2.8 Product serial numbers
Press the Home key and then F1, press 8 to access the Serial Number menu.
