Jadak Photo Research SpectraScan PR-7 Series, Руководство пользователя

Страница: 75 / 142

Chapter 5
– Setup Menu
71
→
→ →
→
E
LLIPSES
(
OR
C
IRCLES
)
The process for defining an ellipse or square is very similar to defining a rectangle or square. Essentially, a box
or rectangle is defined, and the PR-7XX creates an ellipse or circle inside the box.
Note: To define a circle, the Width and Height values must be identical. For a horizontal ellipse, the
Width value must be larger than the Height value, and for a Vertical ellipse, the Height value must
be larger than the Width value.
1. Touch the field adjacent to CIE Pass / Fail so that it reads Enabled.
2. Touch the
▼▲ icons in the
Shape field until Ellipse appears.
3. Define the Upper Left Corner by:
a.
Touching the ▼▲ icons in the
Edit field until Corner appears.