Jadak Photo Research SpectraScan PR-7 Series, Руководство пользователя

Страница: 71 / 142

Chapter 5
– Setup Menu
67
→ →
I
MPORTING
D
ATA
A
S A
.MEA F
ILE
Although it would be unlikely to have to perform this procedure for two PR-7XX instruments, it is possible to save
a measurement on the SD card of the
Source instrument, and then use that measurement data in the Target
instrument.
1.
Create a new file (see Chapter - 7 for more information) on the SD card in the Source instrument (see
Chapter - 7 for details). Make sure this file does not have the same name as another file on the same card
with a
.txt
extension. The software will always try to use files with a
.txt
extension first during the spectral
calibration sequence.
2.
Measure the sample with the Source instrument.
3.
Save the measurement to the file from Step 1 . Make sure that this measurement is the only
measurement in the file . If multiple measurements are stored in the file, then the most recent
measurement (last measurement saved) will be used to generate spectral factors in the Target
spectroradiometer.
4.
Remove the SD card from the Source instrument and insert it into the Target instrument.
5.
Make sure Custom Spectral Correction is Disabled and that One Time Calibration is Enabled .
6.
Enter the name of the file from Step 1 by touching the Spectral File field to bring up the Spectral File Dialog.
→ →
7.
Measure the sample with the Target instrument.