Jadak Photo Research SpectraScan PR-7 Series, Руководство пользователя

Страница: 59 / 142

Chapter 5
– Setup Menu
55
displayed data set appears at the top of the screen
– in this example, CIE Illuminant D75.
OR
Touch the ▲▼ icons adjacent to
Current View to scroll through available selections. Select Internal
RAM or External SD Card , then touch Prev or Next to scroll through selections. The title of the
currently displayed data set appears at the top of the screen
– in this example CIE Illuminant D75.
OR
Press the MEASURE button to make a measurement of the illuminant.
3. Touch Recall to accept the selection.
4. When finished, touch Back.
M
ATCH
S
AMPLE
P
ROCEDURE
In the Match Sample mode, target values for the Reference display are entered by the user.
FIGURE 48 - RGB DISPLAY CAL SETUP SCREEN
1.
Touch the ▲ ▼ icons adjacent to the
Mode field to select Match Sample.
2. Touch the
▲ ▼ icons adjacent to the
Match Method field to choose between Y, xy (luminance and CIE
1931 xy) or xy (CIE 1931 xy only) . This instructs the PR-7XX to attempt to perform a complete match
including the photometric brightness of the device, or setup the display based solely on the chromaticity
points and disregard the brightness.
3. Touch Select located next to White Point . The Measurement screen appears.
4. Set up the display to be measured, then press the MEASURE then touch Recall, or just touch Recall to
select the currently displayed values.
5. Touch Back to return without making changes .
OR