Jadak PHOTO RESEARCH SpectraScan PR-655, Руководство пользователя

Страница: 132 / 160

PR-655/670 User Manual
116
R
EMOTE
C
ONTROL
C
OMMAND
D
ETAIL
Command Description
B
Purpose : Set LCD backlight level
Syntax : Bnn[CR]
Bnn = Backlight / Brightness level in percentage.
Range of nn = 0 to 100%
Response : Backlight set to nn %
C
Purpose : Clears the current instrument error
Syntax : C[CR]
Response : None
D
Purpose : Download data from the PR-6XX
Syntax : D<data code>[CR]
Response : 0000,<data>[CR][LF] If all OK, else
NNNN[CR][LF] (NNNNN = Error code)
Note: <data> in response code refers to the specific measurement data set returned based on
the data code sent to the instrument. Refer to the Data Code section for details..
E
Purpose : Full Duplex (Echo) ON / OFF
Syntax : E[CR]
Response : None
F
Purpose : Measure frequency of light source
Syntax : F[CR]
Response : 0000,ff.ff Hertz (Period = nnnnn milliseconds) If all OK else
NNNN[CR][LF] (NNNN = Error code)
I
Purpose : Return instrument status / error report
Syntax : I[CR]
Response : 0000[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code)
L
Purpose : Assign measurement description
Syntax : L<Character String with max length of 20 characters>[CR]
Response : 0000[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code)
Note: Entry remains valid for the duration of the current Remote Mode session or until a
new L command is issued. If L[CR] is issued with an empty string, the current
description is returned.
M
Purpose : Make a Measurement with the PR-6XX
Syntax : M<data code>[CR]
Response : 0000,<data>[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code)
Note: <data> in response code refers to the specific measurement data set returned based on
the data code sent to the instrument. Refer to the Data Code section for specific
information.
Q
Purpose : Quit (Exit) Remote mode
Syntax: Q
Response: None