background image

HS-1RS User’s Manual

 

 

  Page 66 

Limited Warranty 

 

JADAK LLC (“JADAK”) warrants the HS-1RS to be free from defects in materials and workmanship and 
to  conform  to 

JADAK’s  published  specifications  applicable  to  the  products  purchased  at  the  time  of 

shipment.  This  warranty  does  not  cover  the  interface  cable  and  does  not  include  any  JADAK  product 
which  is  (i)  improperly  installed  or  used;  (ii)  damaged  by  accident  or  negligence,  including  failure  to 
follow  the  proper  maintenance,  service,  and  cleaning  schedule;  or  (iii)  damaged  as  a  result  of:  (A) 
Modification or alteration by the purchaser or other party, (B) Excessive voltage or current supplied to or 
drawn  from  the  interface  connections,  (C)  Static  electricity  or  electro-static  discharge,  (D)  Operation 
under conditions beyond the specified operating parameters, or (E) Repair or service of the product by 
anyone other than JADAK or its authorized representatives. 
 
 
This  warranty  shall  extend  from  the  time  of  shipment  for  the  duration  published  by  JADAK  for  the 
product  at  the  time  of  purchase  (“Warranty  Period”).  Any  defective  product  must  be  returned  (at 
purchaser’s expense) during the Warranty Period to JADAK factory for inspection. No product will be 
accepted  by  JADAK  without  a  Return  Materials  Authorization,  which  may  be  obtained  by  contacting 
JADAK.  In  the  event  that  the  product  is  returned  to  JADAK  within  the  Warranty  Period  and  JADAK 
determines to its satisfaction that the product is defective due to defects in materials or workmanship, 
JADAK,  at  its  sole  option,  will  either  repair  or  replace  the  product  without  charge,  except  for  return 
shipping to JADAK. 
 
 
EXCEPT  AS  MAY  BE  OTHERWISE  PROVIDED  BY  APPLICABLE  LAW,  THE  FOREGOING 
WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR 
IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
JADAK’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS 
LIMITED  TO  THE  REPAIR  OR  REPLACEMENT  OF  THE  DEFECTIVE  PRODUCT  WITH  NEW  OR 
REFURBISHED PARTS. IN NO EVENT SHALL JADAK BE LIABLE FOR INDIRECT, INCIDENTAL, OR 
CONSEQUENTIAL  DAMAGES,  AND,  IN  NO  EVENT,  SHALL  ANY  LIABILITY  OF  JADAK  ARISING  IN 
CONNECTION  WITH  ANY  PRODUCT  SOLD  HEREUNDER  (WHETHER  SUCH  LIABILITY  ARISES 
FROM  A  CLAIM  BASED  ON  CONTRACT,  WARRANTY,  TORT,  OR  OTHERWISE)  EXCEED  THE 
ACTUAL AMOUNT PAID TO JADAK FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL 
REMAIN  IN  FULL  FORCE  AND  EFFECT  EVEN  WHEN  JADAK  MAY  HAVE  BEEN  ADVISED  OF  THE 
POSSIBILITY  OF  SUCH  INJURIES,  LOSSES,  OR  DAMAGES.  SOME  STATES,  PROVINCES,  OR 
COUNTRIES  DO  NOT  ALLOW  THE  EXCLUSION  OR  LIMITATIONS  OF  INCIDENTAL  OR 
CONSEQUENTIAL  DAMAGES,  SO  THE  ABOVE  LIMITATION  OR  EXCLUSION  MAY  NOT  APPLY  TO 
YOU.  
 
 
All provisions of this Limited Warranty are separate and severable, which means that if any provision is 
held  invalid  and  unenforceable,  such  determination  shall  not  affect  the  validity  of  enforceability  of  the 
other provisions hereof. Use of any peripherals not provided by the manufacturer may result in damage 
not  covered  by  this  warranty.  This  includes  but  is  not  limited  to:  cables,  power  supplies,  cradles,  and 
docking  stations.  JADAK  extends  these  warranties  only  to  the  first  end  users  of  the  products.  These 
warranties are non-transferable. The duration of the limited warranty for the HS-1RS is for one (1) year.

 

Содержание HS-1RS




















































































Отзывы: