background image

Bar Code Scanner (USB) 

Installation Instructions

Follow these instructions to connect and program any of these USB bar code scanners:

JADAK flexpoint HS-1M

 on the X-Porte, Edge

,

 M-Turbo, S Series, or NanoMaxx ultrasound system

Symbol LS2208

 on the NanoMaxx, M-Turbo, or S Series

 

ultrasound system

When connected, the bar code scanner is listed on the system’s USB or USB Devices setup page.

See the 

Bar Code Scanner User Guide

 from FUJIFILM SonoSite for information on safety and cleaning.

Configuring the JADAK bar code scanner

To connect and program the Jadak bar code scanner

1

Attach the scanner cord to the bar code scanner and to a USB port on the ultrasound system. 

See 

JADAK flexpoint HS-1

M

 Quick Start Guide

 included with the bar code scanner. 

For location of USB ports, see the ultrasound system user guide or Help (X-Porte only).

2

Turn on the ultrasound system.

3

Scan the following two bar codes in the order listed:

USB Kybrd

STX Prefix

ETX Suffix

 

DOS CTRL

ASCII MODE

4

To ensure the scanner has been configured to work with your ultrasound system, FUJIFILM SonoSite 
recommends opening a patient information form on your system and scanning a bar code. Your system is 
successfully configured when you scan a bar code and the patient ID (and associated patient information, if 
any) populates the patient information form. 

Configuring the Symbol bar code scanner

To connect and program the Symbol bar code scanner

1

Attach the scanner cord to the bar code scanner and to a USB port on the ultrasound system. 

See 

Symbol LS2208 Quick Start Guide

 included with the bar code scanner. 

For location of USB ports, see the ultrasound system user guide.

Отзывы: