Jacuzzi J - 200 J - 230 Скачать руководство пользователя страница 11

Страница: 11 / 64

J-200

DanGer:

rIsK oF severe InJurY or DrownInG!

Body entrapment:

May occur when part of the torso becomes

entrapped, inserted or sucked into a suction or outlet opening.

Never allow children to play or get near the suction fittings, suction

•

covers, filter, filter lid or skimmer assembly.

DanGer:

rIsK oF severe InJurY or DrownInG!

evisceration (disembowelment) entrapment:

May occur when the

buttocks becomes entrapped, inserted or sucked into a suction or

outlet opening.

Never sit on suction fittings, suction covers, filter, filter lid or skimmer

•

assembly.

Never allow children to play or get near the suction fittings, suction

•

covers, filter, filter lid or skimmer assembly.

DanGer:

rIsK oF severe InJurY or DrownInG!

mechanical entrapment:

May occur when jewelry, swimsuit, or

hair accessories become entangled, knotted or snagged in a drain

suction or skimmer assembly.

Never allow your jewelry, swimsuit, or hair accessories to come close

•

to the suction fittings, suction covers or skimmer assembly.

Never allow children to play or get near the suction fittings, suction

•

covers, filter, filter lid or skimmer assembly.

3.2

Hyperthermia

Prolonged immersion in hot water may induce hyperthermia (over-

heating). The use of alcohol or drugs can greatly increase the risk of fatal

hyperthermia in spas. A description of the causes, symptoms, and effects

of hyperthermia are as follows:

Hyperthermia occurs when the internal temperature of the body reaches

a level several degrees above the normal body temperature of 98.6°F

(37°C). The symptoms of hyperthermia include drowsiness, lethargy

(fatigue), and an increase in the internal temperature of the body. The

effects of hyperthermia include:

Unawareness of impending hazard;

•

Failure to perceive heat;

•

Failure to recognize the need to exit spa;

•

Physical inability to exit spa;

•

• Fetal damage in pregnant women; and

• Unconsciousness and DANGER of drowning.

A Warning Sign is provided in your warranty packet. Please install at

a location near your spa, where it is visible to users of the spa. For

additional or replacement Warning Signs please contact your local

Jacuzzi dealer and reference item number #6530-082.

Содержание J - 200 J - 230

































































Результаты поиска

Содержание J - 200 J - 230

Отзывы:

Похожие инструкции для J - 200 J - 230

Бренды по названию

Популярные бренды

Jacuzzi J - 200 J - 230, Руководство пользователя

Результаты поиска

Содержание J - 200 J - 230

Отзывы:

Похожие инструкции для J - 200 J - 230

Бренды по названию

Популярные бренды