Jacobsen SLF 1880, Техническое руководство по ремонту

Страница: 19 / 236

INTRODUCTION
1A-9
• Disconnect the battery negative (-) cable before
removing or installing electrical components. Always
connect the battery negative (-) Cable last.
• Certain test and adjustment procedures must be
performed with the battery connected. Use care to
prevent arcing when working on live circuits or
components. Arcing can cause component damage
and could ignite flammable materials.
Dispose of Waste Materials Safely
Routine service can produce waste products such as
used oil and grease, anti-freeze, and used batteries.
If not handled properly, these materials can pose a
threat to the environment.
Collect fluids in well-marked, approved storage con-
tainers. Some waste fluids can react with certain types
of plastics. Make sure the fluid to be stored is compati-
ble with the storage container. Never use food or bev-
erage containers to store waste fluids.
• Dispose of waste fluids properly at approved local
recycling centers. If recycling facilities are not
available, contact your local community for the
correct disposal procedure for waste fluids.
• Dispose of old batteries properly. battery electrolyte
contains sulfuric acid and other hazardous
materials. Never place an old battery in the trash.
Batteries must be disposed of in a manner
consistent with EPA and/or local regulations.
NOTICE
Never dispose of waste fluids by pouring them
on the ground, down sewer drains, or into any
body of water.