manualshive.com logo in svg

Jackson AJX SERIES, Инструкция по установке, эксплуатации и обслуживанию, Страница: 38 / 102

Поделиться
Скачать
Jackson AJX SERIES Скачать руководство пользователя страница 38

30

07610-003-60-98-L

OPERATION

OPERATING INSTRUCTIONS

To shut the 

machine

 down, press the OFF button on the front of the machine. To drain the 

machine, move the drain handle to the OPEN position. If the machine is equipped with a 
booster, shut it down according to its manufacturer’s instructions.

Clean the machine at least once every 24 hours or at the end of the day. Cleaning 

removes soil and debris that might become trapped in nozzles or deposited onto ware.

1.  Remove all strainers and use a hand-scraper to scrape foodsoil into trash. 

2.  Remove float switch cover and clean it and strainers with the pre-rinse hose.

3.  Rinse float switch off and rinse the tank out. Inspect tank for debris.

4.  Remove curtains, scrub with mild detergent and brush, and allow to air-dry.

SHUTDOWN

CLEANING

For machines with 

pre-wash sections, also 

remove and clean the 

pre-wash strainer.

For machines with 

pre-wash sections, also 

remove and clean the 

pre-wash curtains.

Содержание AJX SERIES







































































































Отзывы:

Нет отзывов