Jackson Labs PHASE STATION 53100A, Руководство пользователя

Страница: 208 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022 208
The default title text is the reserved string (Serial #) . If a show title query is issued
during a measurement and the default title has not been changed, the reserved string
will be replaced with the serial number of the PhaseStation that is running the
measurement.
- show version
Returns software and hardware version information (Figure 92).
shutdown
This command can be used to request immediate shutdown of the TSERVE server process,
disconnecting all connected clients. To disconnect the current client without exiting TSERVE,
use the
quit
command instead.
start
stop
These commands can be used by any connected client to initiate a new measurement or
terminate one that is already in progress.
In many applications, it may be more convenient to start a measurement at the time TSERVE is
launched and allow it to run until the server itself is stopped. This can be accomplished with the
/start
command-line parameter. Other command-line parameters can be used in lieu of the set
<property> commands when necessary.
The above approach is analogous to pressing the START button on a physical test set. Streaming
clients can connect to the data port and acquire data from the PhaseStation 53100A without the
need for any Telnet clients or other terminal applications to connect to the command port.
Figure 92