Jackson Labs PHASE STATION 53100A Скачать руководство пользователя страница 167

Страница: 167 / 225

PhaseStation 53100A User’s Manual V1.04 25-Apr-2022

167

TraceSuppressSpurs([Boolean status])

Sets and/or retrieves the

status

of the spur-suppression flag controlled by

Trace→Suppress spurs in noise traces

(

Ctrl-s

)

. Refer to this command for more

information.

To return the current spur-suppression flag value, call

TraceSuppressSpurs()

with no

argument.

TraceThickness([Number status])

Sets and/or retrieves the

status

of the flag controlled by

Trace→Toggle trace thickness

for current measurement (

)

. Refer to this command for more information.

If a value other than 1 or 0 is passed, all traces will be rendered with heavy lines.
(Boolean true and false values may also be used.) To return the current flag value, call

TraceThickness()

with no argument.

TraceTickMarks([Boolean status])

Sets and/or retrieves the

status

of the flag controlled by

Trace→T

ick marks (

)

. Refer to

this command for more information.

To return the current flag value, call

TraceTickMarks()

with no argument.

TraceXDEVBars([Boolean status])

Sets and/or retrieves the

status

of the flag controlled by

Trace→Show xDEV error bars

(

Ctrl-e

)

. Refer to this command for more information.

To return the current flag value, call

TraceXDEVBars()

with no argument.

TraceXDEVClipBW([Boolean status])

Sets and/or retrieves the

status

of the flag controlled by

Trace→Clip xDEV traces by

noise bandwidth (

Ctrl-b

)

. Refer to this command for more information.

To return the current flag value, call

TraceXDEVClipBW()

with no argument.

TraceXDEVClipConfidence([Boolean status])

Sets and/or retrieves the

status

of the flag controlled by

Trace→Clip xDEV traces by

confidence (

Ctrl-v

)

. Refer to this command for more information.

To return the current flag value, call

TraceXDEVClipConfidence()

with no argument.

TraceXDEVSpline([Boolean status])

Sets and/or retrieves the

status

of the flag controlled by

Trace→

Draw xDEV traces with

spline interpolation (

)

. Refer to this command for more information.

Содержание PHASE STATION 53100A


































































































































































































































Результаты поиска

Содержание PHASE STATION 53100A

Отзывы:

Бренды по названию

Популярные бренды

Jackson Labs PHASE STATION 53100A, Руководство пользователя

Результаты поиска

Содержание PHASE STATION 53100A

Отзывы:

Бренды по названию

Популярные бренды