Locker JACK
Unpacking the Locker JACK
Included:
1 Locker JACK
1 Door Lock Control Key
1 Power Cord
2 90 degree wall mount brackets
4 10-32 x 5/8” screws
Optionally Purchased:
40 Micro USB cords
40 Lighting connector adaptors
Installation
For safe and proper installation JackedIn Power recommends installing the Locker JACK as indicated below:
1. Choose a location for the Locker JACK that has a 110 V outlet within 6 feet of the power entry module. Remove the
Control Key that is taped to the back of the unit and store in a safe and secure location outside of the Locker JACK.
2. Install the two 90 degree wall mount brackets as indicated in picture below (See Figure 1) before mounting the
Locker JACK unit to them. Use three (wall material appropriate) lag bolts (1/4” dia x 2” long) per 90 degree wall
mount bracket (6 lag bolts not included with the unit).
Figure 1
