Jack JK-58420B, Руководство по эксплуатации и каталог запасных частей, Страница: 18 / 23

5/9
3 System parameters setting list 3 System parameters setting list 3 System parameters setting list 3 System parameters setting list
3.1 Parameter mode
3.1 Parameter mode 3.1 Parameter mode 3.1 Parameter mode
1、In the standby state,press key to enter the parameter modes.
2、Press corresponding to key and key ,the parameter value is changed.
3、When the parameter values have increased and decreased, parameter interface flash.Short press key
to save the modified parameters.Long press key to exit parameter interface,return to standby panel
model.
NO
NO NO
NO RANGE
RANGE RANGE
RANGE DEFAULT
DEFAULT DEFAULT
DEFAULT Description
Description Description
Description
P 9 9
0~12 1
Voice selection
0：OFF;1：Chinese 2：English 3：Persian4：Vietnamese 5：Russian
6:Polish 7：Portuguese
8：Spanish 9：Turkish 10：Arabic 11：Indonesian 12：Bangladesh
Original setting: Chinese
P 0 1
200~3000
2700
the maximum speed of free sewing (the global maximum speed)
2700
P 0 3
0/1 1 Needle stop position selection (0:up; 1: down)
P 0 4
200~3000 1500 Start back tacking speed
P 0 5
200~3000 1500 End back tacking speed
P 0 6
200~3000 1500 Continuous back sewing speed (W sewing)
P 0 9
0/1 0 Soft start switch(0:off; 1: on)
P 1 5
0~2 0 Mode of stitch correction 0: continuous；1:half stitch；2:one stitch
P 1 8
1~120 70 Stitch balance for start back tacking No.1(Pull in compensation)
P 1 9
1~120 10 Stitch balance for start back tacking No.2(Release of compensation)
P 2 2
0-50 8 back sewing valve when stitch addition
P 2 4
0~1024 80 Trimming point of pedal
P 2 5
1~120 54 Stitch balance for end back tacking No.1
P 2 6
1~120 12 Stitch balance for end back tacking No.2
P 3 0
0~31
0
Feed forward torque of motor: 0: normal functions 1-31: feed forward
torque level
P 3 1
10~199 50 Trimming afterburner coefficient (motor afterburner)
P 3 2
1~500 400 tension device solenoid working duration time ms
P 3 3
0~100 0 Tension device solenoid per cycle closing time (ms)
P 3 7
0~100
0 Tension device solenoid per cycle opening time (ms)
P 4 5
0~100
1 Back stitch electromagnet per cycle opening time (ms)
P 4 6
0~100
2 Back stitch electromagnet per cycle closing time (ms)
P 4 7
200~360 360
After trimming anti pull (It realizes trimming is pulled back
function)
P 4 9
100~500 200 Trimming speed
P 5 0
1~500 150 Presser foot lifting electromagnet full output time ms