Jack 6040-D Скачать руководство пользователя страница 67

Страница: 67 / 79

星火全自动缝纫控制系统使用说明书

Operation Instruction for Xing Huo Automatic Sewing Control System

7.2 Combine File

In file processing, if you need to combine few graphics into one graphics for processing,

you can do it through the following operations. Combination can be undertaken to up to eight

selected files.

In auxiliary operation interface, press the

button to enter combine file

interface, as shown in figure:

Select the files needed to combine on the right, after clicking to select, the selected files

will be added to the left, and the same file can be selected for many times to combine. Related

functional specifications are as follows:

: click the file name on the left side, the text will be red, click on this icon will

delete the selected file.

: choose the file name on the left side, click this icon to enter "Offset Setting"

interface, the selected file can be combined after overall offset.

: click this icon to enter the "Edit Menu" interface, the composition file on the left

side can be processing previewed.

: click this icon, it will prompt to set file name to save composition file on the left

side.

Содержание 6040-D















































































Результаты поиска

Содержание 6040-D

Отзывы:

Похожие инструкции для 6040-D

Бренды по названию

Популярные бренды

Jack 6040-D, Инструкция по эксплуатации

Результаты поиска

Содержание 6040-D

Отзывы:

Похожие инструкции для 6040-D

Бренды по названию

Популярные бренды