HOW TO ASSEMBLE THE
Imported Easels by Jack Richeson & Co., Inc. - Kimberly, WI - Phone: 1-920-738-0744 - www.richesonart.com
7/13
A. Easel
Frame
With Mast
1. 2 - Slide Guides
2. 2 - Knobs (with bolt)
3. 2 - Plastic Washers
4. 3 - Wood Screws
5. 2 - Brass Washers
6. 1 - Knob
7. 1 - Bolt
8. 1 - Slide Guide
9. 1 - L-Bracket
10. 2 - Wood Screws
11. 1 - Knob (with bolt)
Step One:
Attach the Easel
Frame (A) to the
Base (C), with the
hardware in Parts Bag
1.
Thread the Knob (with
bolt) through the Plastic
and Brass Washers, the
Base leg, the Slide Guide,
and into a recessed nut
on the Easel Frame.
Tighten. Repeat on
other side.
C. Base With
Shelf
B. Back
Support
Leg
1
2
3
4
5
Parts Bag
1
Parts Bag
2
Parts Bag
3
6
7
8
9
10
11
Step 1
Step Two:
Using the 3 screws from Parts Bag 1, mount the hinge on
the Back Support Leg (B) using the pre-drilled holes on the
back of the Base (C).
Step Two
You may select any of the 5 height
positions for your easel frame.
Pre-drilled
hinge holes
for Step 2.
Lobo Easel
#883201
Made from Lyptus
®
Wood
Lyptus
®
is a registered trademark of Weyerhaueser.