How to Assemble the
ACADEMY DULCE EASEL
#840200
Jack Richeson & Co., Inc.
P.O. Box 160, Kimberly, WI 54136-0160
1-800-233-2404
Fax:1-800-233-2545
richesonart.com
top canvas holder
side braces
side legs
mast
lower canvas holder
bottom cross brace
front base
base
rear base
bottom cross brace
top cross brace
Warning!!
Step 1 is the most
important part of the assembly.
When this is done properly,
the rest of the assembly goes
easily. This kit is designed to
give the user a professional
furniture quality easel. That
means glued parts. Please
assemble the easel completely
before adding glue. After you
are sure of the assembly steps,
then reassemble, using wood
glue on all of the wood plugs.
Also, wait until you are
finished gluing the entire
easel before inserting the
black plastic plugs that
cover the screws. They
are difficult to remove
once they are in place.
Check and Organize all Parts
TOP
TOP
Bag contents:
1st Step; figure A-1
2 - black knobs w / 2
1
/
2
"
bolt & metal washer
4 - black plastic feet
8 - dowels (wooden pegs)
4 - 1
1
/
2
" screws
4 -
1
/
2
" screws*
Bag contents:
2nd Step; figure A-2
2 - black knobs w / 2" bolt
& metal washer
12 - dowels (wooden pegs)
6 - 1
1
/
2
" screws
6 - 1
1
/
4
" screws
1 - black knob w/ 2
1
/
2
" bolt
attached to wooden
wedge block w/spring
16 - plastic plugs
* The 4-
1
/
2
" screws included in
the 1st package are not used
until the end of assembly.
On all pieces, the larger holes
are for the dowels, the smaller
for the screws/ bolts.
A
H
E
E
D
D
C
B
I
G
F
A
INSIDE
INSIDE FRONT
INSIDE
INSIDE FRONT
TOP FRONT
(Detailed instructions on reverse side.)
rev. 9/2005
